Search results

The tire changer needs new bearings (actually needs a new top case half since it's cracked, but that's another problem). Ranger says it's a sealed unit that should be replaced for $700 USD, but the manual shows a slew of parts, including standard-sized bearings. The case halves are sealed with...

Brand new in unopened box Perfect for garage or crowded space Folds flat against wall when not in use Sturdy steel frame with 4 legs and wood benchtop Local sale only - will not ship

A/C in my MDX has been about the only reliable thing on this car during my ownership, but even that has now let me down. I have the Harbor Freight Pittsburgh A/C gauge set and this vac pump: https://www.amazon.ca/dp/B016APRO6Qa and using the 12oz cans of SuperTech "pure" R134a (no additives)...

I have an old R980XR with manufacture date 12/04, so not sure if that's 2012 or 2004. Anyways, I got it cheap from a mechanic that was moving and while it wasn't in perfect condition, it worked well enough to get the job done. The entire tabletop and spindle wobbled a little bit, but I worked...

I've been thinking of getting this 18" air hammer bit for my 498K Thor. I'm thinking it would be useful when trying to push out a wheel hub from behind, giving me 18" to clear any parts of the suspension. But then I was thinking, with that long of a shank, how would I keep it on target as it...

I have what appears to be a 1/2" ratchet head in a 3/8" handle OEM'd by Tone. I love this ratchet, but it no longer works and spins with no resistance. I got it at Princess Auto and would normally return it for an exchange, but they no longer carry it. I originaly though I broke the teeth on...

I've had my lift for just over 10 years now, and noticed recently that there's an occasional drip of ATF on the floor from the end of the hydraulic cylinder. I only use the lift once a month, if that, and then it's usually left in the fully raised position with a car stored on it on the locks. I...

I have a 4-post lift, high-lift door, and 8500 opener with the travel set to the maximum doorway opening. When a car is raised high enough to walk under with the hood facing the door, the door stops before hitting the windshield. Sometimes it's easier to work on things with the trunk facing the...

I'm thinking of finally getting a Big Nasty or Thor to help with (among other things) an upcoming Subaru hub replacement. Is a quick chuck really necessary? As a hobbyist, my time is "free", and for the few times I'll need to break it out, I don't think the small amount of time to unscrew the...

A few years ago, I bought a used R980XR (MFR date: 12/04 - is that Dec 2004, or April 2012?). It's been such an upgrade over manually changing tires, even compared to using a modified HF or even NoMar. It originally came with a steel head without plastic protectors to prevent scratching the...

What does this error mean when I try to upload some JPG files?

I plan on installing a 240V, 5000W, 20.8A electric hanging heater in my attached Mississauga residential garage that is fully drywalled. My main electrical panel is in the basement which is unfinished. I believe the calculations work out to it needing a 30A breaker and 10 gauge wire, and if it's...

I got my Ranger R980 tire changer well used, and the turntable has always been a little loose/wobbly, so I need to be extra careful to prevent scratching the wheels. Does anyone know if this is normal wear and tear, and which one (if any) of these parts likely needs replacing? Other than the...

I recently bought this 10T manual press and want to convert it to air/hydraulic. How do I size a pump for it, and where can I get one that isn't too expensive (the press cost me less than $150)? On a side note, I'm looking at the electric/hydraulic power unit for my QuickJack and am tempted to...

Last week I had the opportunity to get a Hobart Handler 100 (flux core only) for $280 CAD, but the consensus was to invest in a true MIG for a little more. Then I came across this Blue Demon for $389 CAD...

I'd like to build a 20x30 shed/workshop in my backyard, but according to the rules here, we're only allowed up to 215 sq ft (although we're allowed to have 3 of them and there's no mention of how far apart they need to be, but still I'd much rather have it all under one roof). Would it be...

No mention of this in my Ranger manual, but found this blurb in a Coats manual: Prior to placing the wheel on the table top to clamp, observe the style and strength of the wheel and adjust the clamp pressure as necessary using the pressure regulator and gauge. Thin spun aluminum rims sometimes...

My new (to me) tire changer is going into my small 20x20 for now, and I need to be able to move it into and out of the corner when not/in use. The whole machine seems to be supported by 4 plastic feet that are drilled for optional anchoring, so I'm going to install some locking castors with an...

Ranger has a motorcycle clamp adapter kit for this changer, but it has metal jaws and doesn't look like they offer the plastic covers that they do for the standard jaws. Does anyone know if there are aftermarket covers for the Ranger jaws, or if there is an aftermarket adapter kit that fits and...