Search results

In the process of rearranging my finished basement after carpet cleaning. I found 3 duplex outlets on the same 15A circuit that are not getting power. Also, a GFCI upstream is not working. Went to swap with a new GFCI since the other outlets weren't on and figured I'd check for power on the bare...

I want to upgrade some outlets in my home; found a few dead ones, etc. I saw a few videos of these WAGO-type from Leviton that look good. Seems to make a solid connection. Any reason not to get these and stay with traditional...

In the process of rearranging and swapping out multiple pieces of A/V gear, I misplaced a few power cords. Would there be an issue using a 13A-125V cable to replace a lost 10A-125V one? The equipment is a subwoofer rated at around 500W peak and appears to be double insulated due to having a...

I have a bunch of spade bits that only go up to 1" and I want to drill a few 2" holes in a MDF computer desk. Specifically the back panel to route power plugs and other cables. I could just cut off the plugs and attach a new plug after running the wires through but that would void my warranty on...

It's about time to re-do our 5x7 bathroom and I'm just looking to get some input. For the subfloor, would marine plywood make a good choice? Just looking for a material or possibly a membrane/coating that would reduce the chances of water damage/rot in the future. Unsure if I wanna do ceramic...

Looking for something that makes accurate cuts for mostly wood trim and can also accomodate PVC pipe. Very limited use; maybe 10x/yr. Max thickness of wood to be cut would prob be 3/4 to 1". Maybe 4" wide. Many reviews on the Stanley at HD or similar complain about poor or inconsistent angles...

Not really finding what I'm looking for after a brief search. Basically, I just want to turn on/off a bedroom ceiling light and fan. Don't need wifi or motion sensor. Just a simple remote that does power only. No dimmer, either. What would you recommend?

I was able to get the basic Nest thermostat for free from my local power company. Currently have a RiteTemp unit which works fine. I was reading about issues with the Nest and the "common wire" needed to power the display and Wifi. Question is: should I just go with a Honeywell or Ecobee and...

Looking for the above for general home use. RTA items, no masonry work, just general home/garage use. For wood, MDF, sheetrock, etc. Budget would be max $75. What volt spec should I look for? Thanks in advance

My local Costco has Feit LEDs on sale every now and then. I usually pickup 60w equivalent A19 for lamps, porch lights, etc. Occasionally will use a few 100W equiv. Feits have mixed reviews on longevity and would prefer to buy a more reliable brand, if possible. Also want to replace about 15...

Just looking for a decent pair for home use. Something that cuts avg gauge ducts, sheetmetal and other materials. Looked at Irwins but some feel they are not sharp enough for cutting without extreme effort. Browsing Amazon reviews but, obviously, GJ is the best place for tool info. Budget up to...

My kitchen GFCI needs to be replaced as it is no longer working. I have a spare Leviton 20 amp GFCI, Model N7899 that I will use as a replacement. But, on the back of the new GFCI, it says do not use in damp or wet locations. Does that mean not to use outdoors and uncovered? This is a...

Just installed a new porch light. I had power to the Leviton VPT24 switch before I shut the breaker off to do the install. Went to turn the breaker back on and now the Leviton has no power, no display. I am trying to check continuity on the timer itself with a multimeter but, since the timer is...

I have a heil/ICP unit that is 25 yrs old and part of a forced air system. 2 days ago, the unit stopped working; no compressor, no fan and no noise or humming can be heard from the outside unit. I have no experience with HVAC but I tried the easiest remedy which was to replace the dual...

https://m.harborfreight.com/household/paint/5-gph-electric-paint-spray-gun-63452.html. Anyone use this? Got to remove old and repaint exterior foundation. Maybe 150SF. Has average reviews but maybe due to improper cleaning. Should I just roll it on or take a shot? Looking to go as cheap as...

Looks like a decent set for $15 w/ 25% coupon. Anyone here like this or, if not, recommendations? Only use for me and wifeys Subarus. Are they any good at pulling the plastic pins w/out breaking? Plus, for occasional door panel removal. Please share your experiences...

I was going to do wifeys' 1st oil change on a '17 Subaru crosstrek but the oil plug was factory torqued way too tight. Tried 6pt socket, breaker bar and, after rounding off the head, even Irwin bolt grips with no luck. Also tried box end of wrench and head is too rounded to get a grip...

Just curious if I can spray foam in this void which has an electrical wire in it. It is a 20A circuit so I hope it is 12GA wire. Will I have any issues with heat dissipation or the wire overheating? The circuit currently supplies a gas dryer and usually a radio or other low amp item. Just wanted...

Hi, first post after a few weeks of finding this site. You guys are very informative and helpful for a DIYer like myself...thanks to everyone who shares their experience. My problem is trying to find the proper wrench to remove and retighten the nut that tightens the rubber gasket on the...