Search results

I want to do an epoxy coat to my 30 x 44 shop floor. The floor has several cracks, 2 low spots that collect water when I wash ( and I wash a lot) and some surface dusting in the one side that is used for parking in winter, welding, ect. My time is very limited so I’m wanting to do this in...

Interesting. I'm getting confused on the coverage rate. How many gallons to do a 1400 square foot floor ? As far as prep work it doesn't say anything about grinding, is that true? I have applied densifier in the past, will that affect adhesions? Do you have dealers in Canada?

Hi all. I have a 6 year old 30x48 shop that is used as a hobby shop. Sleds, quads, welding, buddies coming over to use car hoist ect, ect. the problem I'm having is the side that sees all the major use is dusting. I originally did put down some densifier because top was soft ( long story ). I...

so how far in from the side wall and front wall are your posts?

i'm running my pex lines tomorrow and would like to prepare for a 2 post lift. i dont have an exact brand/ style of lift picked out. i see they range anywhere from 125''-145'' outside to 100''-120'' inside and i will stay 24'' away from those measurments but how far from the front and side wall...

i'm going to use a hot water heater for my infloor heat, i plan on fitting this in a bathroom/ utility room but i want this room as small as possible. how much room do i need for the hot water tank, pressure tank, pump ect?

thanks for the responses guys. i have made several phone calls locally and i'm having trouble even finding someone that deals with oil furnaces. the one place i found that deals with them couldn't answer the question. so if i may ask a dumb question, what kind of pump am i looking for?

if i mount my heater higher than the fuel tank, will the pump on the heater **** the fuel or will i need to ad a pump??

i'm talking with a local contractor to build a 30x44 pole shed. it will have a 14' ceiling, shingles, sideing, tin interior, alot of electrical, hot and cold plumbing, 6 windows, 2 12x12 doors and 2 man doors. i live in alberta so things are pricey, all materials come to $25,000. what should i...

is there anything wrong with building a pole barn in a sandy area? ive heard all sorts of opinions from local builders and there all different. some say use a cement plug, some say don't worry about it, one suggested trenching for the poles and set the poles on a 4x6. what do you guys think?

ive never heard of these drive over lights, can you elaborate ?

just to clarify, i'm not worried about the load factors at all. the tree comparison is a good one and that is my worry. in the oilpatch we will push/vibrate piles to refusal, usually 10'-15'. we will mount communication towers up to 60' high with solar panels, so done right these will tolorate...

i don't know what the difference would be if i was to hook up a boiler or hot water tank, i would only want the floor at a constant 50 degrees and i believe the ground around here is 40- 45 degrees. this will be in my 30x44 shop and i live in the north, to keep this thing at room temperature...

i will be pouring my floor next month and i am pushing 4'' piles [ pipe] in certain areas of the floor. i was going to get mounting measurements for my lift and push a pile at those locations and weld a plate that would end up being flush with the top of floor so i would be mounting directly to...

has anyone here ever tried running line around a buried water tank and through the infloor heat system. i have access to excavators so the only cost i could see would be the pump, tank and line. it should also cool you down a little in the summer wouldn't it. i'm not talking trying to rely on...

i was planning on padding up at least 18'' from ground level with clay and maybe a skiff of gravel, that way i would be able to have slope away from the bottom of the walls but i'm still going to have snow piled up on the sides. the only reason i'm trying to avoid the pony wall is for ease of...

i think the compressor would freeze up, i will eventually mount it up high and build an insulated compartment for it, i will have a sink, i'm looking at an on demand electric water heater so i won't need a hot water tank, i will drain that to my gutter wich will be piped to drain outside. as...

my wife and i just bought an acreage with no garage so i finally get to build my dream garage. i have a couple hotrods, sled and quad so there is lots of wrenching taking place. just to keep things short i will start with the pad and later i will add the rest of the build, i haven't totally...

found this forum while searching for garage pics. looks like a ton of info on here. i will be building a 30'x44' shop next month so i'm doing as much research as i can until then wich means i will have lots of questions. posting my build in general discussions if anyone cars to check it out.