P3OPL3SH3RO
Active member
I have 2 in stock near me showing $399.99
Sent from my SM-N920V using Tapatalk
Home Depot Clearance Thread 2016
- Thread starter ratchet_gear
- Start date
- Status
Sent from my SM-N920V using Tapatalk
Sent from my iPhone using Tapatalk
That's the gun I need, have some nails for that, that I got months ago.
Yeah one of the in store PCs around here shows East Haven as having them as well. Not sure its worth the ride for me yet or if I just want to go there to get away from everyone for a bit
Yeah one of the in store PCs around here shows East Haven as having them as well. Not sure its worth the ride for me yet or if I just want to go there to get away from everyone for a bit
It's a ride for me too, which is part of the reason I wasn't going to rush back. They do seem to always have clearance items though. That's where I had gotten multimeters and they had one of the echo top handle saws. They just wouldn't sell it though.
cagullett1
Well-known member
Atleast bag it, or you'll be dealing with "missing package" if you aren't careful.
Post Office will send you free boxes to your house if its a smaller item. For larger items, see if you have a box company in your area that sells boxes for cheap, you may have to buy a 25 pack or something but it will be far cheaper than retail usually. Worse case scenario home depot sells boxes pretty cheap and you can cut them down to size.
Sent from my iPhone using Tapatalk
$300.06 here. They have 3 of them. My local store ***** for deals. Also had 2 of the Wink systems at full price.
goodysgotacuda
Well-known member
Yes, colleagues and I started the program at the University of North Texas. They are entering their fourth year now. Lincoln event.
Sorry, back on topic!
Sent from my iPhone using Tapatalk
Spn1025
Banned
Sent from my iPhone using Tapatalk
What's full price on that? Not on clearance here anyway..
Edit: nvm $400 on HD.com. Why would a finish nailer be the same price as a framing nailer?
Spn1025
Banned
Why in pieces? it looks like it was mint in the "before" photo lol
stonerado
Well-known member
Nearest store to me had 2 nailers in stock, still at $300.06. Going to stop at the other one in town that showed stock since I'm working right by it today to see what its pricing is at.
danwolfgang
Well-known member
Wow, there are a lot of us in CT! I visit the Manchester store, and occasionally Glastonbury. FWIW, I've never found a penny deal at either store, but haven't tried hard, either. I have found more deals at Glastonbury.
swoyer
Well-known member
4 framing nailers @ 100.03 price.
Cherry Hill, NJ
Bensalem, PA.
Sometimes the stock reflects the display model and sometimes it does not. Try to find stores with more than 1 when possible.
Sent from outer space using Taptalk.
Cherry Hill, NJ
Bensalem, PA.
Sometimes the stock reflects the display model and sometimes it does not. Try to find stores with more than 1 when possible.
Sent from outer space using Taptalk.
Last edited:
Sent you a PM!
P3OPL3SH3RO
Active member
I did see yesterday at a HD near me they had 2 Rigid 6Gal pancake air compressors on a shelf marked down to $69 I believe it was. It shows discontinued on the website if I try to look it up. I sure don't need this so I didn't look very close but maybe I should check that tag closer and look at the date.
Its still $79 at my local stores. I think only 1 store around me has any left.
FWIW, I think its a great compressor. VERY easy to walk around with.
P3OPL3SH3RO
Active member
I bet it's $79 at mine then and I am just not remembering correctly. I just purchased a Makita MAC2400 several months back or I would have looked at this closer.
trialrun
Well-known member
Ditto that, Gbury and Manchester are always the last to mark stuff down.
rpearlberg
Well-known member
we should join forces to make sure we have CT covered.
cagullett1
Well-known member
So many guys reselling those nailers on eBay has the price under $200 now. Good job guys lol. Hope some of yall plan on holding on to them a little while.
Qrazy
Well-known member
The only ones I see under $200 are auction which still have multiple days left. All the "buy it nows" are $250+...
mswol767
Well-known member
Glastonbury is hard store.. They run a clean shop there.. lots of stuff go on clearance a lot slower too. Manchester i can never find a good computer to use.
mswol767
Well-known member
Not sure if this was posted, but I think it drop this week
Cool not yet in CT but waiting till $150 and going to pop.
This
rpearlberg
Well-known member
I forget which store it was, but I saw a couple of the 7480's. Ffld has one of the 745's I think (at least last week they did).
trialrun
Well-known member
Enfield CT had the DW745 marked down to $229, still waiting on this to drop to $190 or $150
stonerado
Well-known member
Scored a nailer for $100.03. The other in stock was the display. Should be a quick flip on Craigslist.
Last edited:
Spn1025
Banned
sold all 3 of the ones I bought yesterday overnight for $245 each
Sounds good to me. My closest store is Waterford.
posaune
Well-known member
Glastonbury has the best computer situation I've seen in CT though. That "installer" computer right near the SCO is great! As of Tuesday, they had some of those Dewalt Tough Boxes on the clearance shelf. Lots of people got those as penny deals last year, so I was excited, but they rang up full price. The only other sort of interesting thing I found was a clearance Dewalt random orbital sander (D26451K?) for $36. I left it on the shelf near the others.
New Hartford is my closest, but I can easily get to Southington, Bristol, Bloomfield, and West Hartford.
Im in Milford, so my most frequented stores are Stratford, Orange and Derby with the occasional trip south to Trumbull and Bridgeport. Very rarely Ill hit Fairfield but I dont go farther south than that, and very rarely Ill hit East Haven but no further north than that.
cagullett1
Well-known member
Sorry I stand corrected, I was looking on my phone and forgot to change the settings to BIN. Thanks. What's shipping costing on them? SPN, didn't keep any for yourself this time?
cagullett1
Well-known member
Anyone have any thought on the longevity of these Paslode cordless framing nailers? I had planned on buying a Paslode F350S until these popped up. Will the cordless one stand hold up to contractor use? Compressor accessibility isn't an issue.
vartz04
Well-known member
if its easier enough for you to have a compressor on site (Standard thing on your jobsite) then i would go pneumatic. But if you do a lot of quick stuff, punch lists, ect. then one of these would be the ticket. I wouldn't frame houses with one long term.
I have a feeling the biggest issue would be batteries dying, not keeping a charge, etc. Typical cordless tool stuff.
Most reviews like the gun itself but a few have mentioned issues with the batteries.
If compressed air isnt an issue, Id stick with those. But the Paslode looks like it would sell pretty well if you wanted to make a profit.
- Status