Lurch67
Well-known member
I tried to get one, but all the stores were cleaned out.
Home Depot Clearance Thread 2016
- Thread starter ratchet_gear
- Start date
- Status
Stanley, Bostitch, Black & Decker, Dewalt, Porter Cable, and I think Delta and probably some others are under 1 parent company. I think thats why they cleared out majority of the bostitch nailers last year and replaced them with Dewalt.
AdamRos19
Well-known member
My local store has a display that is 1 blade for 14.97- even though you can even BOGO online AND PICK up in that same store
Short Round
Well-known member
I went in today to see if they had an finish nailers left and was refused kiosk computer access. I was told to go check the end caps when I asked about checking out clearance products. I walked around the store for a bout 45 minutes checking end caps and the top shelves.
Queensbury NY store. Funny thing is, not a single employee asked if they could help once I got beyond the main desk.
It's probably not a good store to hunt in, so I just will likely skip it. It's about 4 miles farther than the local Lowes. I did pick up 500' of 12/2 and 14/2 for garage wiring. I didn't like the looks of their panels.
Queensbury NY store. Funny thing is, not a single employee asked if they could help once I got beyond the main desk.
It's probably not a good store to hunt in, so I just will likely skip it. It's about 4 miles farther than the local Lowes. I did pick up 500' of 12/2 and 14/2 for garage wiring. I didn't like the looks of their panels.
swoyer
Well-known member
I didn't buy any but there were only a few that I even saw
Sent from outer space using Taptalk.
Stanley Black & Decker Corporation currently owns the following tool brands:
- Stanley
- Black & Decker
- DeWalt
- Porter Cable
- Mac
- Vidmar
- Proto
- Facom
- Bostich
- Lista
- some other weird/niche ones...
They used to own Delta, which Black & Decker acquired along with Porter-Cable from Pentair, before the Stanley and B&D merger. Delta was sold to a Chinese firm in 2011.
Nice, i guess they used to own and make Husky tools for Home Depot until Home Depot acquired Husky or at least that is what this old employee was telling me.
DanielSimpsonDay
Banned
- Joined
- Apr 9, 2016
- Messages
- 411
Some Stanly stuff is branded stuff. They allow others to use the Stanly name to slap on their product. They do it with flashlights, I think battery chargers and some other things.
Nice score.
Also kinda ballsy standing there putting 8 bills in the sco haha, i would have swiped a cc or scanned gc
Sent from my SM-N910P using Tapatalk
emachado
Well-known member
Sent from my iPhone using Tapatalk
DanielSimpsonDay
Banned
- Joined
- Apr 9, 2016
- Messages
- 411
emachado
Well-known member
. This should be a penny already! I hate my local store, still 9.73
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
. This should be a penny already! I hate my local store, still 9.73
Sent from my iPhone using Tapatalk
Still full price here lol
emachado
Well-known member
Still full price here lol
Well 1st time I'm ahead ahahaa
paulsomlo
Well-known member
If a clearance item I've purchased drops further, and I request a refund of the difference, what happens if it has pennied out already? I'm not anticipating or expecting that the service counter will give me the item for $0.01, but I'm wondering if they'll have trouble finding the last clearance price?
I know the answer to this must be here, but the thread has gotten so large, it would take hours to find it.
I know the answer to this must be here, but the thread has gotten so large, it would take hours to find it.
They don't do price adjustment or refund the difference on clearance items. Been covered many times here.
But they will do a return. Once you complete your return. Ask to buy it back. If it drop, it will ring up as lower price.
You can alway confirm on price check app to see if it penny-out or if it's still on the lower Price you want it for before you risk it ringing up as a penny.
My local HD *****. They guard the computers like they're gold. ALL of them. There are no customer computers. I asked an associate at customer service where I could find the computer to fill out an employment application and her reply, I kid you not, was "You don't have a computer at HOME?"
I've gotten 2 price adjustments in the past 2 weeks on clearance. 1 on the makita 36v saw and the other on the dewalt air compressor. They will do it just not when it hits a penny.
Sent from my XT1254 using Tapatalk
Cazz
Well-known member
If anyone needs some z-wave/wink sensors, the GoControl/2Gig kits are at x.02
SKU 1001290777 3 door/window sensors, 1 motion sensor and 1 siren. $25.02 was $83.32
SKU 1001290771 2 door/window sensors and 1 motion sensor. $13.02 was $45.32
There are already 3 SD threads and 1 on the SmartThings forum about these.
SKU 1001290777 3 door/window sensors, 1 motion sensor and 1 siren. $25.02 was $83.32
SKU 1001290771 2 door/window sensors and 1 motion sensor. $13.02 was $45.32
There are already 3 SD threads and 1 on the SmartThings forum about these.
DanielSimpsonDay
Banned
- Joined
- Apr 9, 2016
- Messages
- 411
The two other posts explained it well. Some stores will do a return rebuy for clearance items, some won't. I would not even think about it for penny item. You need to do it sooner than later for clearance items. Don't try to get the lower price for something you bought 2 months ago. They almost certainly will say no and you are risking them setting up a no price match, no return system for clearance items. Don't give them a reason to set those things up.
Also, ONLY do a return rebuy for things you really want and very sparingly, don't make it a standard option. I would only do it for things I am keeping for myself and only for items where the value/price change is significant.
drwheels
Well-known member
Knipex have not dropped at one store that has them. Crescent of all kind left in a hurry at.03 price.Waiting on fathers day hoopla to be over.
Last edited:
Same experience for me. No issues until it hits penny.
I was able to pick up the pliers wrench for $13 but couldn't find any cobras. They show the side cutters for around $7 too but couldn't find any of them either.
Magnificent Bastard
Banned
- Joined
- May 24, 2016
- Messages
- 31
Shipped to store. Wonder how he pulled that off. Thought about putting them on a cart and checking out.
Sent from my SM-N910V using Tapatalk
emachado
Well-known member
Shipped to store. Wonder how he pulled that off. Thought about putting them on a cart and checking out.
Sent from my SM-N910V using Tapatalk
I am sure he order online for the $249 price, Free shipping to store. Return it once he picks it up and re-buy at lower clearance price in store lol
Finally out of stock now online. Last night they still had some available.
Person helping forklift driver bring this down was not happy that I found it. He insisted that they had plenty on the sales floor, 16g one's and telling me that in the rafters that's all they had too. I told him I want the 6 gallon one and I see right there.
Last edited:
swoyer
Well-known member
.43
Sent from outer space using Taptalk.
Actually my store does price adjustment on clearance items. You got 2 weeks after purchased and only if it is not a huge difference in price clearance. Never had a problem, but they won't do penny adjustment.
Sent from my SM-G900V using Tapatalk
Spn1025
Banned
I'd check the dates on any good/drinks lol
Magnificent Bastard
Banned
- Joined
- May 24, 2016
- Messages
- 31
Stick to the deals please.
Sent from my SM-N910V using Tapatalk
Sent from my SM-N910V using Tapatalk
AdamRos19
Well-known member
Says the guy looking for penny drinks.... Or is it someone to drink with? Doesn't sound like a posted deal to me...
- Status