rabidsquirrel
Well-known member
I just send the seller a note stating I received an empty envelope with a large hole in it (the post office was kind enough to tape over it after the ratchet fell out). Both times I've gotten an apology and a refund.
Let's See Your Recent eBay Purchases!
- Thread starter Moose-LandTran
- Start date
I just send the seller a note stating I received an empty envelope with a large hole in it (the post office was kind enough to tape over it after the ratchet fell out). Both times I've gotten an apology and a refund.
asp
Well-known member
I think the Super Bowl distracted a lot of potential bidders. This auction ended 4 mins after GB won. I wasn't expecting to win it for the price I took it at...
http://cgi.ebay.com/ebaymotors/ws/e...0539646222&viewitem=&sspagename=STRK:MEWNX:IT
I know shipping is a little bit of a killer, and I don't much care about the socket, though I'm sure it's a good one.
I plan on getting a good set of chrome sockets to go with it.
So how did I do?
edit: oh yeah, this is my first SO tool. I blame this board.
http://cgi.ebay.com/ebaymotors/ws/e...0539646222&viewitem=&sspagename=STRK:MEWNX:IT
I know shipping is a little bit of a killer, and I don't much care about the socket, though I'm sure it's a good one.
I plan on getting a good set of chrome sockets to go with it.
So how did I do?
edit: oh yeah, this is my first SO tool. I blame this board.
tonydanzah
Well-known member
3/4 stuff doesnt bring as much as you would think
Yes, indeed. Its missing the drive wheel and gearbox though.
A guy in Ohio, is supposed to have all kinds of parts for Rockwell machines in general.
think this a decent deal? flare wrench's and 1/2" impact swivel
http://cgi.ebay.com/ebaymotors/ws/e...429455&viewitem=&sspagename=ADME:L:OU:US:1123
http://cgi.ebay.com/ebaymotors/ws/e...0611000172&viewitem=&sspagename=STRK:MEWNX:IT
http://cgi.ebay.com/ebaymotors/ws/e...429455&viewitem=&sspagename=ADME:L:OU:US:1123
http://cgi.ebay.com/ebaymotors/ws/e...0611000172&viewitem=&sspagename=STRK:MEWNX:IT
trout
Well-known member
NY Old Guy
Well-known member
Whoop di Scooby Doo .. I bought this old snap on portable tool box on ebay:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170597898334&ssPageName=STRK:MEWNX:IT
I surprised myself with how crafty and sneaky I could be by waiting until there was 4 seconds left and then pouncing like a jungle puma from a tree limb onto my unsuspecting prey.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170597898334&ssPageName=STRK:MEWNX:IT
I surprised myself with how crafty and sneaky I could be by waiting until there was 4 seconds left and then pouncing like a jungle puma from a tree limb onto my unsuspecting prey.
Last edited:
sporty_drew
Well-known member
asp
Well-known member
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320653668305
to go with the blue point ratchet i won a few days ago. $6.10 (including shipping) per piece purchased, not bad considering it's all US made 3/4" drive stuff.
to go with the blue point ratchet i won a few days ago. $6.10 (including shipping) per piece purchased, not bad considering it's all US made 3/4" drive stuff.
OP
Moose-LandTran
Well-known member
More..
Knipex Extra-slim long-nose waterpump pliers:
Knipex mini 125mm Cobra waterpump pilers:
Knipex long-nose pliers:
Knipex bent long-nose pliers:
NWS short combination pliers:
Stahlwille 1/2"-drive 8mm hex & M16 triple square socket drivers:
Stahlwille 1/2"-drive long T55 Torx socket driver:
Stahlwille 1/2"-drive E10-E24 Torx socket set:
Laser 3/8"-drive E6/8/10/12/14 universal torx socket set:
Laser Vauxhall 1.0/1.2/1.4 chain-drive timing tools:
Snap-on bolt-grip puller set:
And now i have no money.
Knipex Extra-slim long-nose waterpump pliers:
Knipex mini 125mm Cobra waterpump pilers:
Knipex long-nose pliers:
Knipex bent long-nose pliers:
NWS short combination pliers:
Stahlwille 1/2"-drive 8mm hex & M16 triple square socket drivers:
Stahlwille 1/2"-drive long T55 Torx socket driver:
Stahlwille 1/2"-drive E10-E24 Torx socket set:
Laser 3/8"-drive E6/8/10/12/14 universal torx socket set:
Laser Vauxhall 1.0/1.2/1.4 chain-drive timing tools:
Snap-on bolt-grip puller set:
And now i have no money.
Here's some of mine. Some good stuff & some stuff to fell my box with.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110646384752&ssPageName=STRK:MEWNX:IT
http://cgi.ebay.com/ebaymotors/ws/e...0733086919&viewitem=&sspagename=STRK:MEWNX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300521372635&ssPageName=STRK:MEWNX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200568250798&ssPageName=STRK:MEWNX:IT
http://cgi.ebay.com/ebaymotors/ws/e...0696683446&viewitem=&sspagename=STRK:MEWNX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280620457564&ssPageName=STRK:MEWNX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110646384752&ssPageName=STRK:MEWNX:IT
http://cgi.ebay.com/ebaymotors/ws/e...0733086919&viewitem=&sspagename=STRK:MEWNX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300521372635&ssPageName=STRK:MEWNX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200568250798&ssPageName=STRK:MEWNX:IT
http://cgi.ebay.com/ebaymotors/ws/e...0696683446&viewitem=&sspagename=STRK:MEWNX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280620457564&ssPageName=STRK:MEWNX:IT
asp
Well-known member
So, I didn't need this. At all. In fact, I had just purchased a nearly identical set, and shipping was a fair amount... but how could I pass it up?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=260734751359&ssPageName=STRK:MEWAX:IT
I'll just resell one of the sets.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=260734751359&ssPageName=STRK:MEWAX:IT
I'll just resell one of the sets.
sporty_drew
Well-known member
More..
Knipex mini 125mm Cobra waterpump pilers:
NWS short combination pliers:
I want both of those, they are on my list to buy
I've passed by deals like that because of the shipping, I hate spending the money and not getting my eBay Bucks because they do that.
By far the nicest pliers I've used so far
Girlfriend found these for me on eBay last week
been selling autobuff magazines like crazy
i bet that cooter is like a pair of vise grips :hitit:
OP
Moose-LandTran
Well-known member
I'd definitely reccomend the the NWS combos, they're excellent pliers and far better than Knipex's equivalent. (Which i also have.) But so far i've found that those tiny Knipex waterpumps are a bit too small to really do anything with. Nicely made and finished but they're just too small. I have the 180mm Cobras and they're about as small as you realistically need.
trout
Well-known member
sporty_drew
Well-known member
not sure how long I'm gonna be holding onto them, but they're mine for now.
Nice, I'm jealous
Just won this 1/4" today, I've been wanting to add these to my collection
Busted Bolts
Well-known member
Some nice to have stuff.
Ferret. $16.71 + 11.06.
King **** 3/8" alu. £6.69 + £2.25. The King **** is a 16 tooth and a 'tad' coarse but works just fine. Very stiff action though. Every click feels like a hammer blow, lol.
Busted Bolts
Well-known member
I think when chadster1 or mrshaun run low on their stock, they can call you to help out
remileblanc
Well-known member
these showed up yesterday
mooman
Well-known member
impulse922
Well-known member
LOL. i grew up in the pokemon era. Might even still have some still in the attic or something
NCCheesehead
Well-known member
these showed up yesterday
Those are sweet, but was the selling price?
remileblanc
Well-known member
price was a lot higher than i should have paid. i wanted a 9 piece set for a long time.
remileblanc
Well-known member
over 300 after shipping to canada.
It's going to get buried in my garage floor and become a midrise lift for my race car.
$455.
rt dak
Well-known member
Just won a KRL1022 a few minutes ago.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220742903965
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220742903965
Last edited:
wornoutoldman
Well-known member
Good score! Congrats!
wornoutoldman
Well-known member
Nice, I'm jealous
Just won this 1/4" today, I've been wanting to add these to my collection
Titanium?
shanker
Well-known member
those were just a limited version, blue anodized, thin profile C-Man ratchets..
I use mine too often to buy pretty ones like that
I use mine too often to buy pretty ones like that
sporty_drew
Well-known member
Yeah anodized titanium blue like shanker said. It is just to look pretty as I have a fully polished version that I use. Like many others on here I've found I like collecting ratchets lol
Last edited:
rt dak
Well-known member
I thought so! Wasn't too crazy about the green color but couldn't pass it up. Will be a nice upgrade from my overcrowded Craftsman quiet glide to say the least.
jrodc455
Well-known member
shanker
Well-known member
bwhahaha....I was mad as hell because I worked a 30 hour shift Friday and I didnt get a chance to bit on that 1/2 big dawg!
Hope ya like it...dont bid against me on the next one on ebay though please
Catalyze
Well-known member
View media item 7998
$25.00 and it is a new 1/4" Mac flexhead ratchet....the seller had it listed only as 1/4 inch ratchet with no real reference as to maker...but they had the mfr part number listed...Mac Sometimes life is good on Ebay
Craig
$25.00 and it is a new 1/4" Mac flexhead ratchet....the seller had it listed only as 1/4 inch ratchet with no real reference as to maker...but they had the mfr part number listed...Mac Sometimes life is good on Ebay
Craig
Here's a minor one, but what the heck. Freud Diablo metal cutting blades work great with a 7-1/4" circular saw. Problem is, they used to be all over ebay for $20, but the lot that fell off a truck or whatever finally all got sold off and the only ones available were for $40 on Amazon. I set up an automatic search on ebay and one showed up from a seller. New in the wrapper still. I got it for $1.04. Sweet.
Catalyze
Well-known member
Nice deal!
Craig
Craig