fred d
Well-known member
Lowes won't just match the price, they will beat it by another 10% plus if you pay with your lowes credit card, you will get an additional 5%
Lowe's Clearance Thread 2014
- Thread starter The Frisco Kid
- Start date
Lowes won't just match the price, they will beat it by another 10% plus if you pay with your lowes credit card, you will get an additional 5%
fred d
Well-known member
elronin
Well-known member
, I've been eyeing it at my Lowes but not on clearance yetNorthCountry
Banned
dankicksass
Well-known member
That impact is 2132G, same as 2131QT. I'd love to snag that for $68, good tool.
Dennis93
Well-known member
And to correct, no they will not give you 5% on top of the 10% for competitor. The small print on the 5% off when you use your card says not to be combined with any other offer including coupons and 10% military discount.
fred d
Well-known member
Impact. 226943
Air hammer. 226951
Air ratchet. 182464
Knife. 36362
Grills 131699
The model numbers on the vice grips
6LN small pair
9LN large pair
Also when a tool gets stolen and it has a bag inside the box, I get the bag for a buck a piece.
Brand is usually Dewalt cause those get stolen the most, jus so happens this one is Rockwell. I am picking up 2-3 dewalt bags tomorrow
Attachments
kobalt 5 pc pliers set for $5.99
Item #: 83419
Model #: 54364
Assorted PliersIncludes 6" long nose pliers, 6" diagonal pliers, 6" slip joint pliers, 7" locking pliers and 8" groove joint pliers. Pliers are made of chrome nickel steel, locking pliers are made of chrome vanadium steel for durability. Double-injected molded handles provides a non-slip grip. Kobalt tools meet ANSI standards.
Item #: 83419
Model #: 54364
Assorted PliersIncludes 6" long nose pliers, 6" diagonal pliers, 6" slip joint pliers, 7" locking pliers and 8" groove joint pliers. Pliers are made of chrome nickel steel, locking pliers are made of chrome vanadium steel for durability. Double-injected molded handles provides a non-slip grip. Kobalt tools meet ANSI standards.
nicksnothereman
Well-known member
My toaster meets ansi standards.
Just kidding, even the chinese kobalt pliers are okay, I've got the groove joint probably will pick up this set for the cutters and needle nose. I hate that "ansi" tag, it doesn't really mean anything for consumers because all of them meet ansi standards even the wrench sets at big lots. That don't mean you should buy them (though I don't know if they're bad, they don't look so hot though).pendragon1998
Well-known member
It would be most helpful for folks posting store-specific deals to include the zip code of the store, so that we can possibly get our local stores to price match.
pauls_workshop
Well-known member
Got a question for the Lowes treasure hunters: Does YOUR Lowes local website ever list a full price but then you go in the store, find it, and it rings up to a super low price after all? OR does your Lowes local website list a low price, then you go to the store, find it, and it rings up a much higher full price? I've found at mine, the latter happens sometimes, where they won't honor the website price (though i could buy it online for store pickup and get that price then), but not the former. And sometimes the website price is marked the same in the store, but that is pretty rare. I'm trying to figure out if it is worth bothering finding an item someone is getting a deal on at a Lowes somewhere and checking in store on it or if it is not worth bothering if the local store website does not list it as a lower price in the first place. Thoughts and experiences? thx- Paul
Unfortunately, all of those situations can apply and I am not sure much can be done about it. For the most part, if I see a price online and head to Lowe's and it is still priced higher, it will ring up at either the online price or pretty close to it. An example would be the 5 piece pliers set (#253677). It was listed at 5.19 on the web site, marked at 11.98 on its display case in the store, and then rang up for 5.60. The utility knives (240888 and 240077) were marked at their original prices from 9 to 13 bucks in the store but rang up for their online prices of $1.70 and $2.20.
I would think a good rule of thumb would be to go with the online price. If you get to the store and it ends up being cheaper, then great but you won't be disappointed.
I would think a good rule of thumb would be to go with the online price. If you get to the store and it ends up being cheaper, then great but you won't be disappointed.
pauls_workshop
Well-known member
MLR, thanks. Has anyone ever had a high price listed online for your store and it ends up being cheap at the checkout line for it? I haven't so far but have found the opposite more than a few times. thx- Paul
Vegaman_Dan
Well-known member
None of the prices listed here are valid in my area. All were at full list price. No deals.
drwheels
Well-known member
I just stumbled on to these. 507435 irwin 3 piece 10inch blades. 3dollars each. 495591 lenox 5 piece recip saw blades 9.97 Reg 16.97.Store zip is 73112. Good luck
Last edited:
zeekh
Well-known member
Has anyone used the irwin circ blades? The Lenox blades seem to be regular price
Took about half an hour to find a set but I found one of the 5 piece plier sets and it rang up $5. The gray and blue grip set was hid behind the black and blue grip set which was $20. They look decent. For $1 a piece you cant beat it for DIY work.
Took about half an hour to find a set but I found one of the 5 piece plier sets and it rang up $5. The gray and blue grip set was hid behind the black and blue grip set which was $20. They look decent. For $1 a piece you cant beat it for DIY work.
nicksnothereman
Well-known member
They had some case mini blackhorns for 7 bucks.
Price on the sae extreme access wrench sets is down to $10.50 (price on the metric went up to 15!).
Bunch of other clamshell tool stuff being clearanced out.
Seems they actually got some new stuff in like mexican drilling hammers. Haven't seen those before (I don't remember them actually having drilling hammers at all in the past). 3 lb and a 5 lb (a weight which I've never seen at retail anywhere in a drilling hammer) but two piece fiberglass.
Price on the sae extreme access wrench sets is down to $10.50 (price on the metric went up to 15!
).Bunch of other clamshell tool stuff being clearanced out.
Seems they actually got some new stuff in like mexican drilling hammers. Haven't seen those before (I don't remember them actually having drilling hammers at all in the past). 3 lb and a 5 lb (a weight which I've never seen at retail anywhere in a drilling hammer) but two piece fiberglass.
Super Sport
Well-known member
I picked up a set of the metric socket trays that were a good deal at $5, marked down to $1. Last one in my store zip 49006.
I don't need them, but for a buck I'm sure I'll find some use! The only problem is, now I need the matching SAE set!
I don't need them, but for a buck I'm sure I'll find some use! The only problem is, now I need the matching SAE set!
fred d
Well-known member
themiz69
Well-known member
WHAT??? that is insane.
11304 comes up as roofing staples. Are you sure that is the item number? I can't even find mention of a motorcycle jack on their web site...
googled motorcycle jack & 11304 and this actually came up
http://www.lowes.com/pd_11304-20535-85003_0__?productId=3339182
David99
Well-known member
What extra 50% are you talking about? A few local stores show the $33.32.
fred d
Well-known member
A lot of times if you ask a manager for an additional discount on any clearance item they can and will go up to 50% off but it's at their discretion and does not always happen
drwheels
Well-known member
I saw a scroll saw reg 199 marked to 34. I passed on it for now.432508 porter cable
Last edited:
Slowboat
Well-known member
I got one - at my Local Lowes. $33.32. Not sure if I will keep it or pass it along to someone else.
alxdgr8
Well-known member
No longer see the motorcycle jack on the website search, the link above works though.
Found one for $33 locally, ordered for store pickup along with some PB Blaster for $2.57...we'll see if they cancel. I couldn't find the bonus size cans of PB last time I was in there maybe they'll have better luck.
Found one for $33 locally, ordered for store pickup along with some PB Blaster for $2.57...we'll see if they cancel. I couldn't find the bonus size cans of PB last time I was in there maybe they'll have better luck.
Last edited:
alxdgr8
Well-known member
Which brand? SKU?
alxdgr8
Well-known member
They didn't cancel my order! Got the jack and 6 cans of PB blaster.
Found a scroll saw on clearance, Porter Cable normally $199 but it was only marked down to $120. SKU 93926
Shows as out of stock on the website.
Found a scroll saw on clearance, Porter Cable normally $199 but it was only marked down to $120. SKU 93926
Shows as out of stock on the website.