OCD's 24x24...
- Thread starter OCD
- Start date
It's been a long short work week... It was nice to stop and pick this up on the way home!!
I am adding a small addition on the rear of my house and also a second story... The main floor will also be gutted and refinished with no load bearing walls... The rear addition is going on pilings, so as soon as my yard dries they can start drilling them in!!
I am adding a small addition on the rear of my house and also a second story... The main floor will also be gutted and refinished with no load bearing walls... The rear addition is going on pilings, so as soon as my yard dries they can start drilling them in!!
Boosted1
Well-known member
Hutch looks awesome.
Good luck w the additions.
Good luck w the additions.
zmotorsports
ALLIANCE MEMBER
Subscribed. Nice looking space you have to work in.
Mike.
Mike.
55cadillacking
Well-known member
Magnificent!
Been awhile since I checked in...From one OCD'er to another, the dumpster organization was impressive, The toolbox looks awesome too and nice job on the Mustang. Looking forward to seeing some pics of the house remodel too
ajohno
Well-known member
Great job.
Been awhile since I checked in...From one OCD'er to another, the dumpster organization was impressive, The toolbox looks awesome too and nice job on the Mustang. Looking forward to seeing some pics of the house remodel too
I have done some exploration demo, it's ugly... House was built in the 40's...
Bathroom that is going to be moved,
Next the chimney has to go... I am kinda procrastinating on that project!!
I did pay a company to come and remove all that old loose fill insulation...
Thank you!!
Lyndon
Well-known member
The fence...
My next door neighbor is a great guy, but doesn't upkeep his house exterior or yard that much... The fence is on my property and was falling apart, so I decided to build a new one... I had never built one before, so this what I came up with!! Lol!! It's been up for a couple years this summer!!
Old fence,
Re drilled all the holes,
The neighbor had no interest in helping out or chipping in on the new one... All of the stuff in this pic was against the fence on his side, I had to move it all away...
No prob!! That finalized how the fence was going to be built!!
His garage has a shed built off it that is too close to the property line, so I only built the new fence to that point and put a gate on my side... I use the spot for junk that has to be hauled away...
Much better!! Glad I put the fence boards tight, they have shrunk a bit...
As for the design, there isn't one screw showing on my side...
I was nice enough to put them all in line though!! He is more than happy with the new fence so all is good...
I even put a border down so my gravel doesn't seep into his yard!!
His side,
The neighbor on the other side offered to pay for half when we do that one!!
My next door neighbor is a great guy, but doesn't upkeep his house exterior or yard that much... The fence is on my property and was falling apart, so I decided to build a new one... I had never built one before, so this what I came up with!! Lol!! It's been up for a couple years this summer!!
Old fence,
Re drilled all the holes,
The neighbor had no interest in helping out or chipping in on the new one... All of the stuff in this pic was against the fence on his side, I had to move it all away...
No prob!! That finalized how the fence was going to be built!!
His garage has a shed built off it that is too close to the property line, so I only built the new fence to that point and put a gate on my side... I use the spot for junk that has to be hauled away...
Much better!! Glad I put the fence boards tight, they have shrunk a bit...
As for the design, there isn't one screw showing on my side...
I was nice enough to put them all in line though!! He is more than happy with the new fence so all is good...
I even put a border down so my gravel doesn't seep into his yard!!
His side,
The neighbor on the other side offered to pay for half when we do that one!!
Spring cleaned the engine bay today!! Lol... 70 kilometers on the beast!! I drive it all summer, rain or shine!!
The hood is all Carbon Fiber,
A buddy in the States sent me this stuff, it's awesome for detailing plastic and rubber...
I got a spring freshen up too this weekend... Went to see Barbershop Al and got a #1 buzz cut...
Usually get a three on top and two on the sides and back, or two and one!!
The hood is all Carbon Fiber,
A buddy in the States sent me this stuff, it's awesome for detailing plastic and rubber...
I got a spring freshen up too this weekend... Went to see Barbershop Al and got a #1 buzz cut...
Usually get a three on top and two on the sides and back, or two and one!!
Wow! the under carriage of the Mustang looks awesome! Good job! Nice job on the fence too, you know the old saying "Good fences make for good neighbors", Is that your neighbors garage that has no siding? Your yard around the new fence looks great too...Keep posting 
Yes, the neighbors garage has no siding because it was built too close to the fence to install any... It was built by the previous owners 80 year old father!! He also built an addition to the kitchen on the existing deck, no permits... It is all rotting away now... I feel kinda sorry for my neighbor, he is in way over his head... Paid big bucks for a piece of junk house...
Did a spark plug swap on my car, went one step colder!!
I love this torque wrench, it beeps and lights up when the value is reached, then displays the exact value you hit...
I like how it keeps track of the number of times it was used that session... One side done, yes I did torque them all!! Lol...
Little polishing,
Done!! Ready for burnouts and road trips!!
I love this torque wrench, it beeps and lights up when the value is reached, then displays the exact value you hit...
I like how it keeps track of the number of times it was used that session... One side done, yes I did torque them all!! Lol...
Little polishing,
Done!! Ready for burnouts and road trips!!
Boosted1
Well-known member
Very nice job on those welds.
Overall underside looks good too.
Overall underside looks good too.
Those sub frame welds were done by a girl!! My buddies apprentice!! He is a welding guru, even has his aerospace tig certification...
Here is some of the tig welds he did on my custom exhaust system he built...
He built the mufflers too,
This is the first system he did for me about 5 years ago, mufflers were aluminum!!
Here is some of the tig welds he did on my custom exhaust system he built...
He built the mufflers too,
This is the first system he did for me about 5 years ago, mufflers were aluminum!!
My car overheated and puked the other day... Had to tow it home...
I had an aftermarket C&R rad in it that has basically leaked since day one...
I had taken out once before and sent it to C&R to get fixed, they poured some epoxy on it where it leaked, charged me 150 bucks and sent it back... Still leaked...
I decided to pull it out and put the factory one back in, glad I kept it!!
Fan relay is toast,
Decided to replace the whole fan assembly,
Factory rad back in!!
I had an aftermarket C&R rad in it that has basically leaked since day one...
I had taken out once before and sent it to C&R to get fixed, they poured some epoxy on it where it leaked, charged me 150 bucks and sent it back... Still leaked...
I decided to pull it out and put the factory one back in, glad I kept it!!
Fan relay is toast,
Decided to replace the whole fan assembly,
Factory rad back in!!
clarky456
Well-known member
Thats great therapy! I hope someone sends the company a link.
Joe
Joe
Power Sedan
Well-known member
You should mail back the radiator in its present state of mass destruction, and request some more epoxy to correct all the leaks again.
I have a similar system from Schwaben coolant refill and purge system. Absolutely Love it, no more air pockets!
I have a similar system from Schwaben coolant refill and purge system. Absolutely Love it, no more air pockets!
Last edited:
My old C/H hose reel works good but the hose was wearing out, so I swapped the hose with a flexzilla and added a couple stickers!!
Moved it a better spot too,
I will run the pipe along the tape line and put a small hose whip on...
Going to see how many friends I can troll with this, lol
Moved it a better spot too,
I will run the pipe along the tape line and put a small hose whip on...
Going to see how many friends I can troll with this, lol