warmpancakes
Well-known member
the day it arrived
Show us your EPIQ's
- Thread starter Rossco
- Start date
the day it arrived
Wow!
The 1st Epiq on the left is a 60" in midnight blue and titanium trim, the center box is a 68" with stainless power top and the 3rd is also a 68" in gloss black and green trim and a bedlinered power top.
<a href="http://s122.photobucket.com/user/slc97sr5/media/Mobile%20Uploads/20160927_012511_zpsbox0p5ye.jpg.html" target="_blank"><img src="http://i122.photobucket.com/albums/o265/slc97sr5/Mobile%20Uploads/20160927_012511_zpsbox0p5ye.jpg" border="0" alt=" photo 20160927_012511_zpsbox0p5ye.jpg"/></a>a href="http://s122.photobucket.com/user/slc97sr5/media/Mobile%20Uploads/20160927_012503_zps8wzbv7uk.jpg.html" target="_blank"><img src="http://i122.photobucket.com/albums/o265/slc97sr5/Mobile%20Uploads/20160927_012503_zps8wzbv7uk.jpg" border="0" alt=" photo 20160927_012503_zps8wzbv7uk.jpg"/></a>
<a href="http://s122.photobucket.com/user/slc97sr5/media/Mobile%20Uploads/20160927_012511_zpsbox0p5ye.jpg.html" target="_blank"><img src="http://i122.photobucket.com/albums/o265/slc97sr5/Mobile%20Uploads/20160927_012511_zpsbox0p5ye.jpg" border="0" alt=" photo 20160927_012511_zpsbox0p5ye.jpg"/></a>a href="http://s122.photobucket.com/user/slc97sr5/media/Mobile%20Uploads/20160927_012503_zps8wzbv7uk.jpg.html" target="_blank"><img src="http://i122.photobucket.com/albums/o265/slc97sr5/Mobile%20Uploads/20160927_012503_zps8wzbv7uk.jpg" border="0" alt=" photo 20160927_012503_zps8wzbv7uk.jpg"/></a>
Nice!
Jake C
Well-known member
Wow, all three yours?
Wouldn't that be awesome?!
No, mine is the red one. While I was shopping for an Epiq there was a serious lack of real world pictures and information on different configurations. I post up various boxes from my coworkers to give you guys an idea of what's out there.
Jake C
Well-known member
Oh okay, all three are nice set ups no doubt
michelin
Well-known member
Very nice SLC! You boys like your EPIQs by the look of it. I guess they have to be low to go under wings, short to remain movable and deeper than KRL to fit more tools in? Both are good boxes no doubt but I see more and more people switch to EPIQ (in the US anyway). Are they much better than the Master series?
Jeepster425
Well-known member
Jeepster425
Well-known member
It's normally never messy, I just happened to be moving between 3 large jobs in the shop and wasn't about to put everything away lol
Sent from my SM-G925T using Tapatalk
montanafordman
Well-known member
Nice photos SLC! I would love to one day have any one of those. I like the classic red, but the cranberry and midnight blue are classy..
By the way I break the ones you fix.
When I was in training a little over a year ago I enjoyed a class trip down to the engine room and the chance to ask you guys some questions and get a close up view of the equipment and your world. I've always enjoyed wrenching on stuff and have many times considering trading my view up front for wrenching and staying somewhat more anchored at home. Staying in hotels isn't as glamorous as it sounds but I consider myself fortunate either way. I certainly appreciate the job you guys do. I'm currently transitioning to the ERJ and will be in SLC later this month for sim training.
By the way I break the ones you fix.
When I was in training a little over a year ago I enjoyed a class trip down to the engine room and the chance to ask you guys some questions and get a close up view of the equipment and your world. I've always enjoyed wrenching on stuff and have many times considering trading my view up front for wrenching and staying somewhat more anchored at home. Staying in hotels isn't as glamorous as it sounds but I consider myself fortunate either way. I certainly appreciate the job you guys do. I'm currently transitioning to the ERJ and will be in SLC later this month for sim training.
Jake C
Well-known member
That's what I mean, Busy. Looks like you are making $$$$ out of that EPIQ.
Good man
I see nobody has measured the draw'ers for me yet??!!
I'll measure some drawers for you but they're not gonna be on Epiq Ha ha
Jake C
Well-known member
Looks like it's the measurement am gonna get.
Where's Strouty at when you need him?
I got 58 inches from the back of my box to the front if the drawer. And the drawers open all the way.
again, not that this solves anything, but now I know about mine, lolAttachments
ChevyCraft
New member
- Joined
- Jun 19, 2015
- Messages
- 3
^^ NICE ^^ Chevycraft
I appreciate the pics and effort fella but .....
What I wanted is the Overhang height and depth. The overhang on the front inside edge of the Draws. You know? The part where you pull the drawerers open eats a small part of the inner draw space. I got 31mm control foam for my socket drawerwres
I appreciate the pics and effort fella but .....
What I wanted is the Overhang height and depth. The overhang on the front inside edge of the Draws. You know? The part where you pull the drawerers open eats a small part of the inner draw space. I got 31mm control foam for my socket drawerwres
Jake C
Well-known member
Are those CRJ-700's?
Here you go! I rapidly sketched it, but everything is very accurate. Let me know if you need more dimensions.
Drawer is: 30AE2004A
A : Roughly about 1.25" / 31.75mm
Edit opps i meant to type 26.6" instead of 26.
Wow that's bad ***! Thank you very much for that.
So I take it that's the 4" high drawer?
That information has kinda screwed my whole plan up.
Wamsutta
Well-known member
That's some awesome skill you got there hautpot. 
), now it looks soooo wrong.
K-Dog
Well-known member
Blue and black.
Love it.
Love it.
MWEric
Well-known member
Finally. Looks great
chrisnazzy
Well-known member
Have a Roush Nitemare Badge. Might put it on the box. (Straight of course)
That badge would complement your new box nicely. Color combo looks sharp!
WhiffySpark
Well-known member
- Joined
- Oct 22, 2009
- Messages
- 6,252
My dealer had a midnight blue with titanium 84 at his house. If I was still in his territory it would have got dropped off today lol
I've had my epiq for just over a year and love it. Snap on dealer told me the rock and roll truck was coming this week he knows that I've been thinking about adding a half locker to the right side. I went on the truck today and he had the side kiq that matches my box that he was trying to off load. List price was $5970
I scored it for $3370 otd which I was more than happy with. The only downside is that I have to wait 6-8 weeks for his replacement to come in.
chrisnazzy
Well-known member
Haven't seen that color combo before on an Epiq. The gray w/red anodized trim looks really sharp!!
I've had my epiq for just over a year and love it. Snap on dealer told me the rock and roll truck was coming this week he knows that I've been thinking about adding a half locker to the right side. I went on the truck today and he had the side kiq that matches my box that he was trying to off load. List price was $5970
I scored it for $3370 otd which I was more than happy with. The only downside is that I have to wait 6-8 weeks for his replacement to come in.
Sent from my SPH-L720T using Tapatalk
probably off topic but does anyone have any noticeable spot welds all over the epiq boxes? i literally just got it maybe a few hours ago and looks pretty bad.
Attachments
is it really noticeable? if i had a better picture, you can actually see little dents on the bottom left corner of my box from about 5ft away. maybe because my color is white?