The thread of Dimple!! Finally.

[jdcompman]

Sorry to hear about the drama, keep you head up NastyZen!

I will be hear patiently waiting; just let me know when they are ready. I would rather support Canadian made garage journal'er than a mail order place.

 

[95riosnake]

That table is... just beautiful.

Can't wait to have a set of my own, glad to see some progress!

 

[Lippyp]

How much is a set? Only downside might be the shipping cost to the uk.

 

[MP&C]

Hey, he's North American!



That's true art there. I'm going to have to save up on the slush fund now, I see.........

 

[iajonesy]

PM sent.

Mike

 

[Flathead Red]

I'm ready to buy as well


Sent from my iPad using Tapatalk

 

[914forme]

Why, why, why did I stumble into this thread. On the list behind the plasma and Tig welder now. And I thought I was under control, once again. Doah!

 

[QuickTurboV6]

I may be in for set when they are ready.

Scott

 

[NASTYZEN]

It was a struggle but, I made it!

I will have them off to the platers on Monday
I will be posting up the web site link soon.

In the mean time...here's my Christmas card for this year.




Cheers

 

[EdT]

You must have made a dumpster full of chips. That's a lot of material removal!!!

 

[zach540]

Count me in for a set when they are available!

 

[Boosted1]

Those dimple dies look great. Like all the other work you post here.
I think those would work great with the new 50Ton press I got last year.
Anxiously awaiting the weblink...

 

[95riosnake]

Very excited about getting a set of these!

(Might be the coolest Christmas tree I've ever seen lol)

 

[NASTYZEN]

Ok guys, I just got the call from the platers. I can pick em up on Wednesday.

I can now safely offer them up to members again.

Here is the link to get them from.:http://clubvirages.com/index.php?op...iew=category&virtuemart_category_id=4&lang=en

Please keep in mind that I started making these for GJ members out of a need for some, when another member dropped the ball on getting them made.
I've only sold sets to members so far ,more out of a service than a business.
They are rather inexpensive and made for the hobbyists on here. Therefore I really don't make that much coin on them. Especially that I had to re program and figure out how to make them all over again after the shop computer got zapped by lightning a ways back........

The other day, I saw an episode of the guys at WELDERUP. I thick it's called Vagas rat rods or something. Any how they were dimpling some holes on a project and I nearly fell out of my chair when I saw that there dies were yellow zinc plated! They weren't my dies but that was interesting....

Goggling, I see that others have now started making Pipe sized dies compatible with the HF knock out punch.

Getting copied is actually sort of flattering in some way.

So, about the link.
You can browse all you want, but if you wish to buy you must register..Like anywhere else on the web....
Please don't send me PM's saying it won't work..if you register, everything should go fine in your purchase.

The kits are HEAVY and shipping should cost in the 50 dollar rage for north America.

Unless your from nowhere Arizona where I was quoted 150 bucks.
Alaska was in the 300 range...
and Europe is 100 to 150

I have 27 Pipe sized and 10 Standard kits available as well as individual sizes already in stock.

First come first served.

Last time ,I had over 40 members all over me to get them as fast as possible......only 6 guys came through.
It took a couple of years to move the rest..

 

[saceone]

Can we pass by your shop to pick them up (and stare at the sick stuff in it?)

 

[saceone]

Ordered a set.

can't wait to use that stuff

 

[jrb2]

Just to make sure I understand what I was seeing on your website, If I order a set of 6, standard size dies, the cost is $145. If I order the first six sizes individually, they add up to $123. Am I missing something?

 

[NASTYZEN]

Can we pass by your shop to pick them up (and stare at the sick stuff in it?)

Always a pleasure to have a GJ member stop in for a visit.
PM sent.

Just to make sure I understand what I was seeing on your website, If I order a set of 6, standard size dies, the cost is $145. If I order the first six sizes individually, they add up to $123. Am I missing something?

It's a screw up.. I have to get that fixed. Thanks for pointing that out.

 

[saceone]

can't wait to pick 'em up.

glad to buy from a local stand up guy *tu*

 

[Flathead Red]

I want a pipe set but it will have to wait a couple weeks as Christmas is close. Thanks for the update and thanks for doing them again!

Red


Sent from my iPad using Tapatalk

 

[95riosnake]

I sent you a PM, tried placing an order last night for the standard set. Registered, filled out everything in the order form, etc. then got to the end and the only payment option it would let me select is cash on delivery, picking them up in person from you. I'm assuming the shipping calculator isn't up and running possibly. Either way I'd like to get my order in for a set of standard dies before they end up being sold out or something!

 

[vagabondmidget]

What's the difference between pipe dimples and regular dimples? I'm still in the remedial fabrication class.

 

[kazlx]

Sizes. Tubing is spec'd by OD, pipe is by ID. You need the dimple die to be the right size for the hole you drilled. People like using pipe sizes because stuff like the greenlee punches are readily available.

 

[dv8customs]

Sizes. Tubing is spec'd by OD, tubing is by ID. You need the dimple due to be the right size for the hole you drilled. People using pipe sizes because stuff like the greenlee punches are readily available.

That should say Pipe is ID

 

[NASTYZEN]

Just spoke to the web master.
He tells me that several orders went through no problem so far...
Many have registered but not completed orders yet.
If your not getting a confirmation for having registered, then your spam blocker may not be letting his e mails through.
I had this exact problem when I tried to register myself yesterday.

 

[saceone]

my problem was with the CONFIRM button, it was too pale and I had to highlight the text to find it!!

 

[95riosnake]

I'll give the order another shot and report back

 

[QuickTurboV6]

I chose the shipping option but it didn't do it. Should it email me a quote?

Thanks,
Scott

 

[MScott]

Just to make sure I understand what I was seeing on your website, If I order a set of 6, standard size dies, the cost is $145. If I order the first six sizes individually, they add up to $123. Am I missing something?

So which is the correct price?

 

[bullnerd]

Nasty...what lathe are you using to make these and how do you like it. I tried looking at your homepage but didn't see it.

 

[vagabondmidget]

Thanks kazlx and dv8customs, makes sense to me now!

 

[kazlx]

That should say Pipe is ID

Yea, fixed, stupid phone.

 

[NASTYZEN]

I chose the shipping option but it didn't do it. Should it email me a quote?

Thanks,
Scott

You have to make sure you get right to the end of the process...Yes you should be getting an e-mail.
Could be the darnned internet. He lives a short drive away, yet I got 2 and 3 day old mails from him this mornig.

So which is the correct price?

I just asked the web master to bump up the individual pricing.
The set should now be the cheaper alternative.

Nasty...what lathe are you using to make these and how do you like it. I tried looking at your homepage but didn't see it.

I make them on a Colchester storm.
My baby.

 

[bullnerd]

Very nice, thanks for sharing.

 

[4EyedTurd]

I'm drooling over here!! You fit that in your garage?

 

[95riosnake]

Just to update, my order went through, I received the shipping quote and will be calling in my card info tomorrow. Can't wait to get these and start making cool stuff!

 

[RivennHewn]

A video of that lathe turning out some dies would be great!

 

[saceone]

No, it is not 4 am Monday morning and I am not checking this thread to see if Mr Nasty has updated this thread
Yes, we are all addicted.

 

[NASTYZEN]

I just came back from the big city with a load of these!



With that I was able to complete these sets too.
Standard dies oiled and ready to box.



I see I have 6 confirmed orders in my inbox already.

Nicole tells me she can see there's several order attempts that didn't reach completion... try, try again is what my Mom used to say..

I will be shipping Monday morning.

I wish I could sooner but I'm off at 6 am to have my sons tonsils removed tomorrow..and have to be at a customers place on Friday morning...

Hang in there just a little longer guys.

 

[95riosnake]

One of those is mine! Can't wait to get them and start making cool stuff, thanks for offering such a great deal and a nice product to GJ members