The vintage Blackhawk Thread
- Thread starter johnnybentwrench
- Start date
Blackhawkfan
Active member
- Joined
- Dec 17, 2023
- Messages
- 43
This one found its way into my vault...I was a tad late to this one last fall…Think it sold for $20 and was shipped out west… Would have loved to own it!
Steve
INSP380
Well-known member
Outstanding!!! I was really hoping someone here got it…This one found its way into my vault...
I have been buying a lot from him as he brings it back to his house. Some outstanding pieces that I’m happy to preserve. Steve
An early Blackhawk No. 2 socket set, ca. 1919-1921, courtesy of a GJ member trade. The sockets are each stamped with the fractional size plus the Arrowhead logo with "U.S.A." below. They have the flat machined top, characteristic of the earlier production. There are pinched tabs at each end to retain the slider. I love its hexagonal bar stock too. I plan on getting a replica of the inside label and keep it in the box free-floating, but will keep the original one attached.
Attachments
Last edited:
d42jeep
Well-known member
Great logo on those sockets.
-Don
-Don
toolnutz19
New member
- Joined
- Apr 29, 2026
- Messages
- 4
I have this vintage jack that I was trying to identify. It's similar to all the images I find with the rectangular lift pad and the light. Where it seems to differ is instead of the embossed lines on the side, it has "Blackhawk " embossed. Any ideas?
Thanks
Attachments
four.cycle
Well-known member
four.cycle
Well-known member
nz44tool
ALLIANCE MEMBER
Interesting day at the flea market...
A Blackhawk 49996 1/2" drive ratchet in working condition!
A Mayhew 30200 mason's chisel
A mystery screwdriver (which I thought might be a Mayhew at first), stamped with a "5" and "Beta-Garantie"
- upon further review (after a little clean-up) - the screwdriver stamp says "Geta-Garantie". Still inscrutable. Anyone?
A Blackhawk 49996 1/2" drive ratchet in working condition!
A Mayhew 30200 mason's chisel
A mystery screwdriver (which I thought might be a Mayhew at first), stamped with a "5" and "Beta-Garantie"
- upon further review (after a little clean-up) - the screwdriver stamp says "Geta-Garantie". Still inscrutable. Anyone?
Attachments
Last edited:
four.cycle
Well-known member
Last edited:
Mintgrun
Well-known member
I posted two of these jack stands in this thread five years ago and yesterday I purchased two more at the same Habitat store. They wanted twice as much money this time around, but I'm happy to have a set of four. I'll make plywood bases for the new two too, since I use them on gravel, or soft plywood on dirt (carport floor).
I think the first pair are newer, based on the labels, but haven't looked at catalogs to compare part numbers. I'm guessing the AX-2 turned into AX-20 and then 67368. I find it interesting that the first pair are rated for 2 tons each, whereas the other two say 2 tons (pair). Yet, they're basically identical in terms of construction. Regardless, they're plenty stout to suit my needs.
Tom
I think the first pair are newer, based on the labels, but haven't looked at catalogs to compare part numbers. I'm guessing the AX-2 turned into AX-20 and then 67368. I find it interesting that the first pair are rated for 2 tons each, whereas the other two say 2 tons (pair). Yet, they're basically identical in terms of construction. Regardless, they're plenty stout to suit my needs.
Tom
hydromanx25
New member
- Joined
- Jul 2, 2026
- Messages
- 3
I just found this site. I have 50 years in the jack repair business and have a lot of old parts. I am retired now but dug out my vintage jacks to rebuild them. Here is a couple of pictures
Attachments
thehorse13
Well-known member
Welcome. You have a few nice Blackhawk jacks there.
y'sguy
Well-known member
Welcome. There are plenty of folks here who need advice on all the hydraulic equipment. You will be a good asset to the group.
four.cycle
Well-known member
Hello there @hydromanx25 and welcome to the site!
Keep this link handy
and this one too
You've found the main "Blackhawk" thread here
There is also a thread dedicated solely to Blackhawk JACKS and Porta-Power only HERE
Stopped near Cleveland and ran into that seller that’s at every flea who wants to tell you that Williams is Snap-On. I’m almost afraid to say it here afraid that some one will say Williams IS Snap On. I had to ask if anyone has EVER paid Snap On prices for his common Williams non Snap on affiliated mid century tools. Anyway, picked up these 7/16 drive sockets and moved on.
Attachments
Last edited:
thehorse13
Well-known member
One of the best things you can ever find is someone who has brand blinders on. They will overprice the object of their affection and give away things that are worth twice as much. Case in point, you have a few nice Blackhawk sockets in your palm.
Well done.Private Lugnutz
Well-known member
I speared the first of these wartime button-release three-groovers out of a big miscellaneous mess of rust, woe, and dismemberment that someone dumped on a $1 table at the flea yesterday. You guys know what happens next. Spent the next ten or fifteen minutes going through it more surgically and methodically with the same screwdriver, and then doing it again just in case I missed one, and came up with the others. Disappointed there weren't more, but a decent grouping, including a deep, which surprised me. Not in the greatest condition, but three of them (40125 - 25/32", 40116 - 1/2", and 40112 - 3/8") are dated coded 1942, the deep (40318 - 9/16") is date coded 1943 and the 40126 - 13/16" is dated code 1944. The odds that they arrived in someone's grandfather's garage box separately? Low, sez I.
Attachments
thehorse13
Well-known member
This 1920s QD box has been laying around my garage for many years. Because I'm not looking to start another large project, I figured that this little box would be fun to clean up. The decal is in nice shape so my plan was to cleanup everything around the entire box, remove and pop the spring back into place on the one spring loaded latch, then give it a lick of black satin paint. Easy right?
Well you know what they say about plans and this is no different.
I first tried feeling around inside of the latch looking for any obvious groove that the flat spring may have simply popped out from. No dice on that avenue, so I decided it was time to open the latch up and see what's really going on inside. The worst case scenario was apparent the second I opened the 3 tabs holding the latch together. You can see that the spring is broken in half. For a second, I thought about just making another one but before I do that, I figured that I would see if anyone has one of these spring loaded Blackhawk latches laying around that they would be willing to sell.
Well you know what they say about plans and this is no different.
I first tried feeling around inside of the latch looking for any obvious groove that the flat spring may have simply popped out from. No dice on that avenue, so I decided it was time to open the latch up and see what's really going on inside. The worst case scenario was apparent the second I opened the 3 tabs holding the latch together. You can see that the spring is broken in half. For a second, I thought about just making another one but before I do that, I figured that I would see if anyone has one of these spring loaded Blackhawk latches laying around that they would be willing to sell.
