Search results

how do i get to it to replace the release cable

that i been preaching for forty years keep an extra fluidmaster, flapper valve, toilet cutoff valve in the hall closet. fluid master ***** a leak, toliet cutoff very old, town aint close, that cost $45, it was $12 not long ago its like not having clean underwear in the drawer on monday...

what if your roof is exactly 20 feet wide. how do you do it?

last week i bought a 16 gauge bosticts off ebay for $13.00 and it works great. I already had one but my boss borrowed it, so i never see it again so showing to my friend, he say hey let me borrow it, that the key word for give it to me, you never see it again, sure give me $120 and you can...

i bought an old theodolite, 1927 model. that what the guy told me. i want check for level. so if i get 200 ft of cleat tubing, fill with water and hang here and then hang other end there, then both mednius be the exact same elevation, huh?

i need a code book on wood framing, specficly commerical, like hotels, schools, fast food etc. I got the IBC, but i need mor specfic on framing

does a punch transfer force different than like a solid rod? is there some elastic resistance in a steel rod, compared to a cast punch,

can you cook water out of oil

i want to add a pressure gauge to my hydraulic press. it has a two way ram in it, what i mean, two hoses to control travel, one at bottom and one at top. which port to i tee into to add the gauge. let say the cly travel down when operation, so to read pressure on what being press and not what...

having brain fart, what you call it, its the tapor chuck holder, well anyway. mine came loose and keep falling out, how do i lock it back in place. its a old twain copy floor drill press

i always use the rustolineal paint in the quart, i think it quart, the small can, well anyway inflation has made the little can of enamal out the roof. it use to be $7.99 now it $16. (lowes) the gallon is over $50, not talking house paint just the oil base metal shop paint. I usually get flat...

I like using zee purlins for framing

are kleins any good?

i was looking at the frame of my truck and it got some surface rust, im not in the slat belt, truck thirty years old, be hard to wire brush. is there anything i can wash it with to remove. dont want to encap unless I have too. thinking more like naval jelly but more liquid. what do the hot rod...

what type oil in your squirter, right now i got 20 wt motor oil but thinking of a lighter oil or a cutting oil.

i need some sticky oil in a can, like bicycle chain lube. I need to oil a concrete form and wd40 likes to run. One time i did it with a can of Pam

I was told by a local hvac company that they did not want my buisness because i dont have a phone.

my heat pump is way oversize, it was free, its been a good unit. 5 ton, but i only need a 3 1/2 ton. But i think i need a new heat pump outside unit. can i keep the inside five ton coil or it that going need to be change too if i go 3 1/2 outside

i need an opinion. my hvac broke, its an old unit, old heat pump, but it been very good unit. the outside unit , the contact had arc closed and the fan starter capator burned a wire. so I replace all that and everything looks good but the contact not getting 24 volts. if i close it manual...

how strong should the magnet on the mag drill be, should i been able to break it loose just by pushing on the top. it just seem awful weak to me. dont want it breaking loose while drilling. its wants to walk a little