Search results

On the back of the garage I want to put a LV transformer to feed some accent lighting. I want to make it looks a nice as possible and I do not want to have wires showing. I also really don't want to have the box just staked into the ground. I know I could just put an outlet outside and have...

I have two 18x8' doors and the top jamb piece (Not sure of name) are low in the middle and a bit higher on either side. I needed the motor housing level so I had to shim about 3/4" on the left side of door1 and about 1/2" on the right. On door two it's about 1/2" on left and 3/8" on right. I...

3/8", 7/16" 1/2", 9/16", 5/8", 11/16", 3/4" and one additional short 1/2" I have a ton of tools/electronics for sale as well as a vintage 2 ton arbor press. These are vintage items worth a decent amount of money however. Take a look at some of what i've got in my dropbox...

These are in great shape. These were made around 1939 and have "select steel" and "drop forged" forged into them. Great for use or for the collector. 7/16", 1/2". 9/6", 5/8", 3/4", 7/8" open end (Box end is one step down) Some info/history about the company...

Some of the tools shows either have stamping or stamping I cannot see. Everything you see is $75. Some are marked as M. Klein & Sons, VC & Co. others have no markings. All old. I have a ton of tools/electronics for sale. Take a look at some of what i've got in my dropbox. Just...

I need to categorize them all but they are 1/4", 3/8" and 1/2". Perhaps in pic you can make out if there is something you need. There are square, shell and T slot as well as dovetail. 2, 3 and 4 flute from what I've seen so far. If there is anything you see you like let me know, i'd be...

I don't even know where to begin selling these things. I know there are at least a hundred of them but not entirely sure what all I have. Anyone have any input, i know many are worth a pretty penny, am I best off going through each one and cataloging them? Some (Most) are 3/8" shank and some I...

I've been advised this is not the place for this but I cannot delete. Put it in the tools thread.

I accidentally knocked out the larger part of a 1/2" knockout while trying to get the 1/2"er out. So now I need go get reducing washers. My question is, is the washer based on the ID of the hole? The reason I ask is that the ID is 1 1/4" but it seems HD stocks the 1" to 1/2" but none of the 1...

NIB the thing had 2 dead batteries in its "6V/900mAh" pack. I threw it on my RC charger and it took nearly 2000 mAh. Oddly still had only 4.1V. Checked each cell and 3 were at 1.3V and 2 were dead (.2V) Oddly I figured these cells would show 1.5V each when fully charged. Which would bring...

I'm sure I know the answer but hoping maybe there is something I hadn't thought about. I have a small solar light w/ an external panel that I want to mount to my new shed roof but I'm leary about screwing into a shingle. Was hoping there was some other way. I don't really want to mount it to...

I'm looking to get a new mailbox and I'm trying to understand the mounting on this. Do these generally slide over a 4x4 already in the ground? Reason I ask is that the bottom of the mailbox is supposed to be 41-45" from the ground but the posts these come with are 54" top to bottom. Now this...

Today we had a quick heavy bit of rain and my wife noticed our garage drain had slightly backed up over the grate. So she went into the basement and saw two small spots where water got in. One of them has been repaired at one point by the previous owner and has actually leaked before. I also...

It seems that a few companies sell an under header mount system. However it seems they all look very similar but looking (Maybe same product?). The housings look the same and electronics to actuate these are all from for Sofmy. any input you may have on any of the following or if you know if...

I'm just curious what your opinions are on this. I am just going to be in/out to get the lawn tractor out. It'll be a 12x10 on a concrete slab. Thanks Dave

I was looking at the lifestyle screens for two 18'x8' doors but they seem to eat up about 8-12" under my existing track and either the main door or screen has to be down at all times (Can't have both down). This poses a problem as i have a lift and I need that space. I did see a retractable...

It does not occur on any other toilet, the odor isn't in bowl and the toilet flushes quickly so I don't think there is an issue w/ the P trap or vent. I doubt the vent is clogged but i suppose it's possible. I wonder if it has something to do w/ my water filters. I did notice this odor on the...

I don't plan to use it, It's a one time use, if you use it please post up so others don't bother. Was in a catalog I get. Dave

And if so, to what degree. I decided today to put a prefilter in since I had particulate clog my water softener mechanism the other day. Before I continue, I did not design this system :). It goes from the pressure vessel 1" for about 10' where it Tees off. One end of Tee is capped and the...

Hello, I am putting in a pre filter on a 3/4" copper line and would like to use unions for a few reasons. One to prevent heat into the plastic filter housing and 2 to allow for easy removal for whatever reason. The housing is a 1" MIP but I'm having issues finding a 3/4" copper pipe to 1" MIP...