Search results

Thought I would share this with you guys. I use this inch pound torque wrench, though it is not a wrench, when mounting scopes on my rifles or other precision tightening in the field. It is a nice small piece of kit. It works by two detents in the handle that are set at a calibrated stiffness...

Looking for a standard set of saltus wrenches between 3/8 and 3/4. Thanks Jordan

So I, like many others, like to work in my garage at night and suffer with a dark spot when my garage door is up and blocks 1/3 of my lights in my small 2 car garage. So I added 4 2 bulb t8 fixtures to the garage door. I mounted them with self tapping screws to the metal door braces. I...

Picks up this drill press on CL over the weekend. I don't know much about it, was hoping someone has some info. Looks to be a mil surplus and the motor has been replaced with a Westinghouse 1/2 hp motor that someone miss wired, as the on/off is reversed. It has to be the largest bench drill...

I am looking to sell my baby. I've owned her for about 5 years or so. Life has gotten in the way and she just sits in the driveway and doesn't get driven often so I am going to pass her on to someone that can use her more. Silver exterior with red leather interior. She has been well taken care...

I found someone on craigslist selling this tool cabinet. They are not sure on the brand and cannot find any identifying marks. It looks like a lista cabinet but I am not very familiar with them so I not sure. It is for sale for $200. Any ideas on the make?

I picked up this Condutix spring activated reel off of CL for $100. It is bigger than anything I have ever seen (I just do weekend hobby work in my garage), probably weighing around 50-60 pounds. It has a 12/2 20 foot cord. I was thinking about switching the outlet out for a double gangbox. I...

I will be installing my air line set up this weekend. I had an idea for a different use for an air line oiler. I use a lot of compressed oil/lubricants that are very expensive compared to various types of oil. I was thinking about using an air line oiler with maybe a 4-8 foot hose and a spray...

My brother and I added a hot water hose bib this weekend. I wanted it mainly for washing cars. We pulled hot and cold water from the sinks and ran it about 14 feet down the wall of the garage. Added two ball valves for mixing then a hose bib. Spent about $120 and took about 3 hours. The first...

About six months ago I purchased some magnet bars from harbor freight because they were on sale. I couldn't figure out what to do with them until today. I'm now using mine to hold some hammers and was able to empty a draw in my box. I have another set of magnet bars and don't want to wait...

I am looking for a 1 and 1/8 combination wrench. I would prefer ratcheting but it is not a must. Looking for american made if non ratcheting. Thanks, Jordan Found what I was looking for, thanks everyone

How are you guys storing your 8 foot ladders? I have a small size two car garage and need all the wall space I have for other storage. Does anyone hang a ladder from the ceiling in a way that the ladder is flush with the ceiling? Thanks

I have an 18 foot wide by 23 foot deep garage. The two walls that are not adjoining to the house are currently ¼ ply wood attached to a 2x3 nailing strip on the bottom, center and top of the wall. This makes it so that nothing can be hung from the week ply wood unless you are attaching...

So I found another person on CL selling a vise that provides very little information. My google skills seem to be lacking this morning, since searching for "C vise #6" is a lost cause. Can anyone help with a brand and quality of the following vise and is it worth $100? Thanks

I found someone on Craigslist selling the vise bellow. They don't have any other information besides inheriting it from their sisters father. I can pick it up for $70 which I think is worth it but I have no other information about the vise (brand, where its made, what sort of quality it is). Can...