Search results

SOLD Nice used Matco 7 Drawer Tool Cabinet - Model 4S in gloss black with black drawer pulls. 40" wide x 22" deep x 40" tall with ball bearing drawer slides. Some fine scratches throughout from normal use over the past 10 years - name plate is missing and no keys. Located on the south end of...

SOLD Selling a Craftsman Model 19390 Block Grinder for parts or whole. As you can see, its missing pieces already. It is functional though; switch is good, spins up smoothly, and even the light works. Let me know if you need pieces off of it or want to buy the whole thing.

Looking for an opposable jaw with pipe insert to replace a damaged one on my Chas Parker No. 87 vise. :thumbup:

Took a trip through southeast Nebraska over the weekend, so we took a slight detour to take a look at the old Petersen Vise Grip plant. They also made Quick-Grips and Unibits here, although the Quick-Grips quickly outgrew their space and they started making them down the road and in Beatrice...

3 boxes of 10 DynaQuip D-4 Quick Disconnect Barbed Fitting 3/8" OD x Female Line Fitting 5/8" ID Total Length = 2.75" Some minor corrosion from storage - otherwise new and unused $25 including shipping for all 30 of them :thumbup:

FOUND ONE! Looking for a good Craftsman 1/2" Flex Head Ratchet #44983 This is the fine tooth version with thumb wheel; prefer V-Series with Forged in USA and Patent Pending on the handle. :thumbup: Picture is example of handle from standard 1/2" version...

Clearing out some inventory; thought you guys here might have an appreciation for some of the older stuff. I have many more photos that I can share of each item; just send me a PM with your email address and I'll send them over. PayPal preferred. 1940's Proto WF-38 Ratchet 1/2" Drive $25...

Picked this up this morning at an estate sale. The guy said it had belonged to his Grandfather. It cleaned up pretty well; I think it may have been repainted at some point in its life (a little over spray on the chrome trim) and sadly is missing one of the drawers, but was still too cool for...

I've been looking around for a while and haven't been able to come up with much. I'm looking for an adapter/reducer for my bench grinder so I can run a wheel with a 5/8 arbor hole on my 1/2 arbor. It seems some wheels (Norton as an example) come with a plastic bushing of questionable quality...

American Tool Quick Grip & Rebranded Quick Grip Clamps Looking for the following American Tool Quick Grip clamps in good condition: 10" Macro #53016 20" Macro #53026 33" Macro #53046 6" Advantage Power #5906ADV 12" Advantage Power #5912ADV 24" Advantage Power #5924ADV 24" Full Size Craftsman...

Looking to buy older Petersen Vise Grips in good condition. Most interested in the following models: 4BN 6BN 6LC 9BN 9DR 9SP 9AC 11HD 11P 310R 310S 18SP 18DR 318R 318S 24R 24SP 24DR 75th Anniversary - ACE Hardware Anniversary Also interested in any models of rebranded versions that you might...

Found this little Columbian 603 in the basement at an estate sale. It appeared to be partially submerged in water for a time as the base was very crusty, but they only wanted $10 for it. I decided to pull it apart and clean it up a bit. Surprisingly everything came apart very easily...

A friend that goes to a lot of estate sales found this nice little Craftsman set and sold it to me for not very much. I wasn't quite sure of the age, and was a little confused by the individual numbers on each socket as I didn't think that came until much later, but the logo on the box was...

Hoping someone might have a lead on these. I recently bought a Craftsman 51871 Bench Vise, Made in USA with 5.5" jaws. One of the inserts is broken and I can't seem to find a replacement anywhere. From what I have learned, two styles of inserts were used on this vise. One had 2.5" center to...

I bought this cart at an estate sale yesterday and didn't think too much of it. It was covered in tools and junk. I got it home today and thought it sure felt top heavy when loading it. I cleaned it up and bit and noticed handles on the side of the drawers... that's odd. Check the numbers...

Hey guys, looking for a few opinions. Apologize about the poor photos at this time. I bought these tool boxes loaded with tools at an estate sale. I'm planning to sell the boxes and wondering what a good starting price would be. I think they are from the 1970's, and are in pretty decent...

Hi Guys; Picked up this old vise at an estate sale yesterday. Got it home and cleaned it up, but can't find any sort of markings that would indicate who made it. I have only found M13, M15, and M16 cast on the jaws and handle keeper, and "RRR" on the the mount for the screw. 4" Jaws and a...

I've been searching around Alloy Artifacts and here and am not having any luck coming up with any info on these wrenches I picked up. They are a nice set, but don't have much more on them than "Forged Steel" on one side and "Made in USA" on the other. There is a small letter on each, but each...

Wondering if anyone has ever come across any date codes for Prentiss vises? I picked up a No. 52 Bull Dog at an estate sale yesterday. When I pulled it apart, I found "027" stamped in the bottom of the opposable jaw. Part number maybe, or date code? No clue, but its a pretty cool vise either...

3 items each priced at $25 in their special offers section on their direct purchase website: https://www.wildetool.com/product-category/special-offers/ 4 Piece large SAE Combination Wrenches 10 Piece Screwdriver Set 4 Piece Retaining Ring Pliers Set I would buy the combo wrenches if I didn't...