Search results

Anybody here using the Milwaukee Packout wall system? If so, what's your general thoughts on it? Well made, sturdy, etc.? For those of you who might be using it, have a figured out a good mount to hang their Rocket Light tower off of it? I know that have the "Long Handle Tool Rack" that...

I need some good 1/4" drive, standard 1" (25mm) long drive hex bits. I don't need/want impact rated. When I say good I mean not made in China and most critical is I need the sizes to be dead on so there is no slop/play in order to prevent damage to the fastener head. This is for precision work...

So I’m finishing my basement and I’m at the drywall phase. I have some experience with drywalling but I’m not 100% sure how best to handle one of the rooms down there? The room is 13’5” x 13’10”. I plan to drywall the ceiling as well as the walls (There is only a bedroom above this room). The...

So I'm going to be installing 16 of these Honeywell LED 4' Linkable Shop Lights... https://www.samsclub.com/p/4ft-led-5000l-shop-light/prod22820266?xid=plp_product_1_3 in my workshop and like most of these 4' LED shoplights, the literature says not to link more than 10 of them together but what...

I'm guessing no but I figured I'd ask anyway... So I really like the Milwaukee Shockwave bit sets but none of them come exactly the way I'd want them. No big deal as there are some basic sets that I can add to and make right for me but in order to do that, I would need to get some extra bit...

Have any of you bought the Honeywell 3500 Lumen Portable LED Worklight that Sams has for $30? If you have, do you like it or are there better options? https://www.samsclub.com/sams/3500-led-worklight-honeywell/prod21263057.ip?xid=plp:product:1:1 I was kind of wanting something with dual lights...

I have some kitchen cabinets I need to paint. I will probably roll the face frames but want to spray the doors and draw fronts. I will probably be using Benjamin Moore's Advance or Sherwin Williams Proclassic alykd resin enamel paints. At this time, I only have a small, 4 gal twin tank...

So here's the deal... I need a new miter saw. I used to have an Hitachi C10FS SCMS but gave that to my son. I have dual purpose for the saw. 1. Standard homeowner/remodeling stuff 2. Woodworking/furniture making. I was going to get the Bosch GCM12SD with the T4B base but that combo weighs a...

Sorry this isn't directly garage related but hopefully you guys will be nice enough to share your opinions/experience on this matter anyway? ;) I want to install a tile floor in a 9'x6' (roughly) laundry room. Plan to use porcelain tiles. Need to verify but floor seems pretty level. Subfloor is...

I guess I was wrong but I thought Milwaukee's "Fuel" label was a way to identify if the tool was one of their newer brushless motor powered tools but I recently found out that they apparently have some brushless models that are labeled "Brushless" instead of "Fuel"? Specifically... I want to...

Will be closing on a new (to me) house at the end of the month and in the meantime, I've being going over the place in my head trying to determine how I'm going to set things up? Here's a view of the garage. Fairly standard 20x20 but it does have a 4' bump out on the right side (you are looking...

So I'm going to be buying a new (to me) house soon which will decent garage and I've always wanted one of those pretty garages like I've seen hear with an epoxy coated floor and color originated paint theme, etc. I know if I'm going to do that, the best time would be before I move in so I've...

Hey guys, Looking to pick up a set of Rhino ramps this week and have 2 questions.... 1. Any reason (other than price) not to get the set rated for 16000GW over the standard 12000GW set? Near as I can tell they are pretty much identical other than what they are rated for (and the 16k set being...

Hey guys, I have an old school, made in the USA, Milwaukee 3/8" Hammer Drill model # 5392-1 (5amp, 0-2500rpm). The drill and case are in very good condition and includes the side handle. I've owned this drill since new and it's only seen a minimal amount of home owner use. This is one of those...

Hey guys, I'm tired of sitting on the ground when doing brake jobs so I would like to get some type of mechanic seat w/wheels but I would like something that servers a dual purpose. A small step would come in handy for working under the hood of my truck or getting something off of a high...

SOLD - Matco SGRRCLM10T Ratcheting, Reversible Combo Wrench set Matco SGRRCLM10T - 10pc Metric (10mm-19mm) 12pt long pattern ratcheting, reversible combination wrench set. These are top quality made in the USA wrenches. These are used and are cosmetically in fair condition (normal use wear)...

Hear me out first! :D I have a full assortment of deep sockets and use them all the time but honestly never really paid much attention to how many times I use them because I had to (i.e. a standard socket just wouldn't work) vs using them just because they were convenient (i.e. could have used...

Matco SGRRCLM10T Ratcheting, Reversible Combo Wrench set Matco SGRRCLM10T - 10pc Metric (10mm-19mm) 12pt long pattern ratcheting, reversible combination wrench set. These are top quality made in the USA wrenches. These are used and look it (normal use signs) but they are in excellent working...

Long shot but do any of you happen to have a Snap On 9 piece Torx screwdriver set that you are willing to let go? I'm looking for the older hard handle set (black) with the silver tray. (Just like the pic below but with black handles). We may be able to work out a trade for some other current...

Hey guys, I need 2 of the Snap-On 5 piece screwdriver trays. This if for the older hard handle drivers and came with the SDDS50 and SDDP50 sets and are silver in color (like in the pic below). They don't have to be perfect but nothing cracked or significantly damaged. Thanks