Search results

Where I work does not have a compressor large enough for serious air tools so it has to be electric or battery powered.

I keep all my cordless tools in one drawer in my tool box at work and now I have to recharge all batteries monday morning,I had a snap on 14.4 impact and a makita 7.2 drill for a few years until I got a Makita 9.6 drill to replace the 7.2 and have been through 3 sets of batteries in the 9.6 over...

The garage is done and now to the little fence between the garage and the attached garage.

One more coat on the lower front and its done,I have a couple small projects to do in the yard and then its back to the cars.

Got the second coat on the side with the entry door and what was needed on the rear,also got the first coat on the other side and then ran out of paint so I am out of money and wont be able to get more paint until friday. I am also thinking about redoing the down spouts so water wont run down...

I was hoping it would be done by now but the weather has not been cooperating too much,should of done it last year but probably would have rained when I started painting.

Making some progress,I am going to put two coats on the whole garage and then let it sit and soak it up and if its nice in september then I will put on a third coat.

I was working until I ran into some yellow jackets in the light and under the flashing so I washed and waxed the Harley and will wait until they will come back to the nest and when I get off the computer I will attack them. While I was sanding I was driving the nails back in and the yellow...

For those who want to see pics here they are and are nothing to get excited about.

I will take some pics tomorrow,I should have put siding on it when I had the money but too late now so its paint.

After all the work I have done in the garage its time to restore the garage,its been over 20 years since it was painted so the other day I took the pressure washer to it and got all the loose paint off. Yesterday I got the DA out and started to sand it and recaulk the windows,probably spend a...

I will check and see if I have that cartridge.

I looked on ebay and nothing newer the 01 so I will probably just have to live with it since I cant justify spending the money on a better unit.

Anybody have one of these scanners and can I get any domestic cartridges that go up past 2001,it works fine for the daily drivers I have but occasionally have a friend or neighbor that needs the codes scanned for slightly newer vehicles so I have to sent then to the discount parts stores. If...

Its been many years since I bought any exterior house paint so whats a good reasonable priced paint and primer that will work on my wood sided garage.

I never had any Proto tools but my dad did have a few along with the many Craftsman,his tools are now my junkyard tools and will use them now.

There is nothing like the good old USA made tools.

I had to install new seats on my picnic table today so to drill the holes through the 2x10s I used my old Makita 7.2 volt drill and it drilled the 8 holes with a not so sharp bit with plenty of power left,I am not impressed with the stubby batteries and will look for used cordless tools that use...

I will be going to a Batteries plus store soon and seeing if they can get me some better batteries,the batteries I got 10 to 15 years ago seem to be much better then what I have gotten lately

Is it me or have the batteries been made of inferior materials,last year I bought a new Makita 9.6 drill and if the batteries would sit a week after being charged they would need to be recharged. Had the batteries replaced under warranty but now I cant use the drill a day with out changing the...