Search results

recently I bought some big wrenches being **** to fill in sizes I didn’t have. I had 27mm 30mm 32mm craftsman, Williams (tawain) 33mm and 32x36 stahl will. I bought in last 2 months Black hawk 28mm, proto 29mm, Williams USA 34mm, tekton 31mm (Amazon warehouse ), Wright 1 1/8 ( Amazon warehouse...

Hi all I bought this to replace my old Scott broadcast spreader . I think it’s big for what it holds. I wanted something high quality that was in between the 2 sizes. But the high quality earthway , titan are smaller so I bought the big ag fab.

Just got a Wright 10x8 . Compared it to my Sk 8x10, GearWrench 8x10 and Long Mac 10x11. Compared 10mm box ends and wrenches in general

Just got the 34mm USA Williams. I had the 33mm for a couple of years . Since they are 1mm apart in size I compared them. Length 33 Taiwan wins : longer Finish: 33 Taiwan (satin) 34mm USA (shiny) Thickness : 34mm USA thicker Comfort : 33 Taiwan has rounded edges : 34 USA squared off edges...

I bought a Wright 7/16 cause I got a bunch of Wright sae polished for a song on eBay . I like the flare but like open end . Here’s a link to affordable Wright wrenches : https://www.ebay.com/itm/124326270165

When I tighten the hose connection to my AR TRXX the inner fitting loosens. When I loosen hose connection inner fitting tightens. Figure I can use the 2 service wrenches like a router collet to tighten tighter for no leaks. 1 inch wright service wrench fits inner fitting . 30mm does not fit...

I bought these in metric and standard . Thought they were kool. https://www.ebay.com/itm/392913804174 https://www.ebay.com/itm/264863282661

These got mixed reviews in amazon . What do you guys think of them ? Not concerned about 6 pt TEKTON Long Flex Ratcheting Box End Wrench Set, 6-Piece (8-19 mm) - Holder | WRN77164 https://www.amazon.com/dp/B01F512HOU/?tag=atomicindus08-20

Couple of years ago I purchased a Bergen metric double box set to preserve my SK g pros ratcheting wrenches . Bergen’s were around $60. In SAE Long wrenches I have gearwrench double box ratcheting one end and fixed box on other end. I spotted a eBay luck hawk double box SAE and was just under...

Just got a proto short double box for $8.99 eBay. Compared with my craftsman and Blackhawk . Note the rust on craftsman last pic

Got this on eBay for $2 and change . Free shipping . Not sending back for only $2 something. Check it out!

Look for price listing amzon wants &112. Another seller $109. This is the lowest I’ve seen these . Precision Instruments PREC2FR100F Wrench (3/8" Dr. Split Beam Torque w/Flex Head (20-100 Ft./Lbs)) https://www.amazon.com/dp/B000YOX568/?tag=atomicindus08-20

Astro Pneumatic Tool 7582 Automotive Tap & Die Set - Metric https://www.amazon.com/dp/B01JBNGZM8/?tag=atomicindus08-20 Ordered this. I have craftsman and Lang rethreaders but wanted a real tap and die set. Supposedly rugged Japanese steel.

1/4 ratchet : Matco 8” , runner up , Armstrong 10-994 3/8 ratchet Armstrong 11-994, runner up wera insulated ratchet 1/2 ratchet Armstrong 12-994, runner up craftsman premium Sockets: proto Blackhawk , runner up Felo Screwdriver: wiha electrical , runner up Sk Punches: facom large , runner...

My FIL upgrades all the time. I have Bosch 1617 and 1618 routers and I am satisfied with them . I know Bosch cane out with new ones . I’m keeping old ones love my Milwaukee 5625 15 amp fixed base in router table . Still like my original bulldog Bosch rotary hammer. Still use my old Milwaukee...

Hi all, I bought a Armstrong 64-221 torque wrench preset to 7lbft. The eBay review said to use a 1/4 Allen for adjustment. However there is a ball at the end . Do you push the ball end in to adjust ? https://www.ebay.com/itm/262483462601 Hope someone knows. New surplus with no paperwork .

I bought a 12 ft coil house air hose for $15’amszon warehouse deals. I could find any 3/8 fittings with 1/4 ends. Do they exist?

I picked this beast up off eBay about 2 years ago for around $37. You must set it internally. I set it to 90 lb ft to torque lug nuts on my FRS. Well it sat cause I used my 30-150lb ft Wright. I checked it with digital torque adapter and read consistent low 60s. Most I could get it too was 72. I...

3/8" Split Beam Torque Wrench 100-600 Lbs/In Precision Instruments PREC2FR600H Review I always wanted a split beam. Plus I like the torque range. Spark plugs are in the 150 “ lbs. I always use a gearwrench 1/4 drive 30-200” lbs torque wrench with a 1/4 to 3/8 adapter . So now I don’t need to...

Seller wanted $169.99 or best offer. He took my offer of $127.77. I bought 2nd to last one. Seller has 1 positive rating no negatives . He has a 2 now. I have him positive feedback . I believe unit is new. It displays last torque reading . The 59.7 it displayed was one of the readings in the QC...