Search results

It’ll make it, possibly, a little easier going that direction. Probably won’t matter that much in your instance though. I had the same attention to detail and I don’t think it mattered for me. And don’t sweat the thwn vs xhhw debate above. My pull was xhhw and it was easy. Let us know how it...

I just did a 135’ pull with 2/0 AL in 2” conduit. It was Real similar to yours. I prelubed it with rags covered in lube, like Terry said. I used mule tape and a **** load of lube. I tried that lube foam And the regular lube and it worked well. I damn near could of pushed the whole thing. My...

I did it. Like someone else said, figure out the wall dimensions and run it up in with some long sweeps. Just finished pulling the cable in mine. I decided I wanted to move it over a little - no big deal. Add some extra conduit while your are at it. Water - I ran on the outside but I like the...

I used one of these for my water main into my shop. Looks nicer than silicone. https://www.mcmaster.com/pipe-grommet/ For the screw hole, put a pan head screw the hole and paint it

I didn’t opt for windows because I already have too many windows as it is to clean. I did a 10X10 roll up door that does well for light and lets the afternoon ocean breeze in. There will be a patio area off that side with a lean to cover.

Meh, I just finished my 50x40x14’ red iron and I’m roughly at $27sqft. I had a graded and certified pad already. Obviously, plumbing and electrical isn’t included either but I did all the rough in and will finish the inside myself. I priced stick built and my friend deal was at $43sqft and I...

Haha I have the same reel from the same time period. I bought it (can’t remember where) and stored it in my conex container. I literally just unboxed it. I’m framing walls in the shop and added studs to mount it and needed to get measurements. I was surprised how nice it was. I want another one.

I had to hire a Civil Engineer for my project. He did the topo map, site plan, grading plan, septic plan, assisted in the archeological survey, and the soils report and testing. I built my house 18 months ago and just finished my shop last month. My civil engineer was $5500 and it was some money...

I did 2- 12x12’s on my 40x50. The way it laid out on my lot dictated it. I’m not sure there’s a perfect design. It works well for me. Against some of the opinions here, I also did a 10x10 on the side for airflow and the eventual “patio” area. I get a killer ocean breeze through my shop. *ignore...

I polished, densified, and sealed my shop floor. Took a day and a half. I’ve spilt stuff on it, no problems yet. Water beads and oil hasn’t soaked in yet. We’ll see how it holds up. It’s only been 2 months. I also used a dye where the bathroom will be. All done with a 17” floor buffer on power...

I know what your saying, but....... I’m not a Miller fanboi anymore. I, along with many professional welders I associate with, have lost faith in ol blue. One guy actually replaced all his tigs with 3 new miller dynasty’s but only because of biz dealings, Motorsports sponsorship etc, and he’s...

What about an Everlast welder? Once my shop is done, a new MIG and TIG will be one of my first purchases to replace my old Miller welders. https://www.everlastgenerators.com/sites/everlastgenerators/files/downloads/products/fa57479c13567fb329297e46f4d9c802.pdf

Yes, I did my house with James Hardie brand siding. Mine were 12’ pieces. Minimize your joints for a cleaner look.

It was RPH I plan on doing the same to my floor.

I had a braided line start leaking at my dishwasher in less than a year. It was at the crimp. It came with the dishwasher and it’s not a cheap one. When I find the time, I’m going to the place that builds all the lines for my race cars and hot rods. I believe he has all the stuff to build the...

You’re correct regarding the UL listing. I read the questions and reviews on the Amazon link. I keep looking for another option, but I keep going back to the LLWINC high bay set you’ve posted before, several times. OP- none the less, your shop and lighting looks great!!

Check out this guys build thread. He used the Lutron stuff in his build. I plan on using it on mine after seeing his. I’ve Also noticed it Used in quite a few commercial buildings I’ve visited. Post 51 https://www.garagejournal.com/forum/showthread.php?t=413162&page=3

Do you have an IES file on these lights? I’m working on my lighting layout. BTW, it’s amazing the info I’ve learned from your posts and threads. THANK YOU!

Definitely. It’s supposed to be high 80’s here on Saturday. Too bad it wasn’t this past weekend. It was in the 60 -70’s all week.

Me too. I pour concrete on Saturday, so I have a bit until the building is even erected. I have the 8510/4500 sitting here, so I’m trying to get an idea of the actual process.