Search results

They used a protective "holster" then. Here is one made for the older 80 series to upgrade to a magnet strap. http://www.tooltopia.com/fluke-h80m.aspx

You may be right. From the 88 service manual- "1-4. Specifications Specifications for the Fluke 88 follow. Accuracy is specified at 18 ° C to 28 ° C (64° F to 82 ° F) with relative h for a period of one year after calibration. AC Conversions are ac-co responding, and calibrated to the RMS value...

May want to look at these Interesting at the first couple minutes of these videos, stating that at certain price point, is that quality of build starts to get better. I work industrial maintenance with electrical / electronic. I have Fluke meters, seems to be what most use in the...

http://store.harryepstein.com/search?q=socket+rail same as craftsman I tried the HF rails, seem to be made of harder/brittle plastic. They also slide around on rail too easy.

My HF boxes had casters with roller bearings. That side plastic washer pushes out and a cage containing the rollers is there, unless HF changed this in the last few years. I also removed that odd grease fitting, retapped to standard grease fitting.

I have ordered from them a couple times. No problems and fast order processing.

I've used them in an industrial setting in the past. For a Torque Multiplier to be of any use, have to be in location where a "counter force" arm can act against, such as other adjacent large threaded fasteners being tightened. These videos may give better idea of where they may and may not be...

also........ http://www.tooltopia.com/lisle-31370.aspx http://www.tooltopia.com/k-tool-international-70061.aspx http://www.toolbarn.com/ridgid-31597.html

http://store.harryepstein.com/cp/SDBAccess/BH-2.html

Titanium Steel, Not sure if your trying to get this temperature probe for your Klien Multimeter. If you are, you have to use a K type most likely. You can plug in other types that will give a reading, but it will not be correct. We use these at work http://www.omega.com/pptst/CL20.html and...

That last link labels it K but desciption, called J- grainger may have messed up there. If you want to use different types of thermocouples, you have to use a thermometer made that lets you select different types of thermocouples (more expensive). Cheaper thermometers are usually K only...

http://www.garagejournal.com/forum/showthread.php?t=100795&highlight=moose+fluke&showall=1 Moose-LandTran did a nice write up on one towards the bottom of this post.

I have the craftsman & a williams, williams is a little bigger & better. from amazon http://www.amazon.com/Snap--Industrial-Williams-28449-Chisel/dp/B005VMPP8E/ref=sr_1_2?ie=UTF8&qid=1332089469&sr=8-2

http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgAdvisoryCircular.nsf/0/99c827db9baac81b86256b4500596c4e/$FILE/Chapter%2007.pdf http://www.byrongliding.com/lockwire.htm

[/IMG]

Just to add a positive comment for foxruntools.com. Order was delivered quick and good prices on what I checked on.

I repaired a Milwaukee port-a-band at a place I work that had an issue of the blade not being square. One or both of the blade guide rollers were worn from what I remember. May have to take blade off to inspect bearing for wear. I do know Milwakee has a nice website to look up pdf...

I've got it, made with fairly heavy wall thickness. Won't crush it by stepping on it. One thing to keep in mind, it comes with a quick connect to fit OTC brand fuel adapters (can't use without them). The fuel inj service kits OTC sell have many adapters, or you could buy them as needed. The...

Stuart at ToolGuyd likes them http://toolguyd.com/small-tool-parts-drawer-organization/ http://toolguyd.com/the-ultimate-tool-box-parts-organizer-bins-schaller-plastic-boxes/