Search results

A few years ago I bought a gearwrench(not ratcheting) 44 piece combination wrench set and they serve good as a main wrench set, https://www.amazon.com/GEARWRENCH-Combination-Wrench-Pattern-Metric/dp/B00H2W7LVK/?tag=atomicindus08-20. I also have a set of blue point metric ratcheting flex...

Looking to pick up a set of stubby flex head ratcheting wrenches in metric. Could have used them a few times in the past and today. Google came up with a few options. Gearwrench has a 10 piece set for 125 and HF has a 10 piece icon for 130. Are there any other options to look into? Would...

I have a nice snap on compression tester set. I got it used and replaced the gauge and it has a couple adapter hoses in the set. Think they all m14 though. I need to test an engine that has M12 threads. Snap on has an adapter but it's 70 bucks. I guess if that's my only option then so be it. But...

I've put in a handful of POE camera setups in the last decade and have all the tools to terminate and test wires and get them working. Need to add a few more cameras to the house we moved into and have another system to do in the near future. So naturally always looking to add new tools to make...

Anyone know if an autel update for 906 will work on the 906bt also? I was given a free update card today by my napa rep and trying to figure out if it will work with my 906bt or not before I try it.

Need to side my house quick. I've done siding before and last time I did it I made a table out of some plywood and some 1xs and then made a guide for my circular saw. Looking to get something a little better and always up for an excuse to buy new tools. I have a track saw and have an extra...

Looking to get a setup to use with my shop vac to clean floors, mainly saw dust and other stuff. Want a quality setup with a couple straight metal extensions and a curved piece and a floor head. Something like this but it doesn't get the best reviews...

Going to be building another set of fake barn beams. Last time I just used a wire wheel on a grinder but since the wire wheel is only 1/2" or so wide it takes some time. Others use handheld drum sanders with a wire wheel drum. When I did the last ones I used a 4.5" chainsaw disc on my grinder...

I've seen these before but google isn't coming up with what I'm looking for. Want to get a blow gun that has a 12 to 16" long metal tube at the end of it that can be slightly bent to fit what I am working on. Would be even better if I could make multiple tubes for it to use for different...

Had a buddy that changed his handle bars on his harley and ran into some issues with pulling the wires threw and then they weren't long enough. Asked me if I could help him out so went and took a look. He pulled off a couple connectors when pulling it threw the bars. And also pulled the wires...

Came across one of my m18 12A batteries that the top of the case came apart. Not sure if I dropped it, don't remember it, or if one of the kids knocked it off the bench or what happened. But the only thing wrong is the top of the case. Pretty sure if I can get a new top I can just screw it on...

Anyone have one of these? Guessing you just squeeze the forks but seems like it may come in handy for those dirty hard to press connector buttons. https://vimtools.com/product/bct1/

My corded hilti sds max I bought used stopped hammering. I didnt pay too much for it so not too worried. May tear it down and see if piston froze up or something since I didnt use it too much. But want to get something else in the meantime. I have some glue down flooring in basement that needs...

Going to start the electrical in my garage shop at the new to us house. House panel is a 200 amp in the basement. Attached garage and sub panel will be about 15 feet of wire from main panel. Going to put a square d qo 24 space main breaker 100 amp sub panel in the garage. Surface mounted on the...

Going to be adding a 30 amp 110 RV outlet either on the outside or inside of the garage for our travel trailer. This will be about 60 to 65 feet from the sub panel in the garage by the time I go up and over and back down. Is 10-2 romex good enough or do I need to derate for that distance? I have...

Bought three 2x4 led trough lights to replace the old fluorescents in the basement. Got them from menards and the box said dimmable with led dimmer. Got them installed and they are super bright so bought an led comparable dimmer and they flicker when you try to dim them. So went back and read...

Had a buddy with a jeep wrangler that had aftermarket rims on it stop over for a rotation. The holes for the lug nuts were very small. The nuts were m14x1.5 with a 19mm head. I have at least a half dozen 19mm lug nut sockets and none of them would fit. I had to use my 3/8" drive chrome...

We bought a house last year and it has about 300 feet of grass ditches along gravel roads. This winter the plows pushed a fair amount of gravel into our yard. So I would like to clean up the grass the best I can before mowing this spring. I have the m18 string trimmer with quick attach and see...

Looking for a good tile probe and see there are all sorts of them out there. Some with points and some with ball tips. Soil is clay mostly in Wisconsin. Want to get the best option so what should I look for?

Picked up a used quik drive screw gun about a week ago. I've never used one before but the older I get the less I want to crawl around on my hands and knees. Have the carpet torn out in the bedrooms and want to screw down the squeaky subfloor before putting new carpet in. Saw this on...