Search results

Do you have pics?

Wrong quote sry

Do,you have any other pictures?

This is the one I plan on getting. https://a.co/d/0gTgfBH4

I guess my drawing was not accurate according to some of the comments here so basically the switch needs to be installed first in the garage and then have the wireless access point coming off of the switch? Basically, the picture below just reverse both products.

Here is the AP I have. Just has one Ethernet input. https://a.co/d/0gaRtSp2 The switch only has one ethernet input. Thank you, so the switch is in line 1st and then the access point comes after that? The switch in the office is not full. I have one port going to my computer then another port...

Based on the diagram, is it possible to add another switch coming off of the wireless access point in the garage?

Mini split will be here tomorrow and I’ve been glancing over the install manual. Just wanted some clarification on the QD fittings . When the Lineset is hooked up to the evaporator, do these QD connections need to end up outside of the building? Is this what the manual is stating? Also, the...

Swapped the wires around and still getting high reading at wires. Battery was replaced as well. I see some of y’all have questioned the accuracy of this device. I’ll see if my neighbor has one and compare the readings.

Both legs measured the same high voltage

Correct. Ill be home shortly, switch batteries and try again.

It’s me again… Just installed 70’ of 10 awg wire for a 240v mini split. The ends of the wires were reading 258v-263 & 128v-131v respectively. When I took the voltage at the breaker, I was around 243v & 123v. Why would the voltage be different?

Wow. This sh*t works!! Gave the pipe a 2 second squirt and started pulling the cable through with kite string. Took about 45 seconds!

The conduit has remained straight. It doesn’t seem to want to curl up

I tried that. Even used a wire nut and clipped off the wings… yea didn’t pull. I’m going go to get some Klein foam stuff

I’ve noticed that 😂

It’s liquid tight non metallic flexible conduit

Will one can fill 70’ of conduit?

It’s liquid tight non metallic flexible conduit. It can take up to 6 stands of 10awg wire.