Search results

Got the lights up in the single bay. Nice to finally have some light in there. Thought I'd try out some 6500K bulbs on this side.

Check the very first sentence in the original post.

Got the last coat of Kilz up on the ceiling in the single bay. Just need to figure out how to layout the lights. Also finished up the front brake upgrade on the KTM. 320mm of goodness.

Got the first coat of Kilz up on the ceiling in the single bay. Also started mounting the 320mm front rotor and caliper bracket to the KTM. Need to get some brake pin grease.

Finished getting the edges of the ceiling screwed in and caulked all the seams. Will be letting it cure and probably get to sanding the seams on Saturday. Then it's paint time!

Changed the oil in the Taurus last night and put in new ignition wires. Looks like that fixed the misfire issue I was having.

Got the rest of the ceiling up in the single bay. Sent from my iPhone using Tapatalk

Put up the ceiling in the single bay today. Almost got it all done, only about 3 sheets left.

Got a sheet of vapor barrier up and wired in the outlet box on the ceiling of the single bay.

Got roof soffit baffles in. Will be putting up vapor barrier on the ceiling in preparation for putting up the ceiling.

I'll be picking one up too. I ended up selling my HF 25' unit to my parents that I had mounted in their garage.

Pulled this **** off the ceiling of the single bay. Getting ready to frame in the new attic ladder and get some OSB up on the ceiling.

Why don't you want someone that works with this everyday to do this? Did he say how much it would cost?

Thanks for the post. Going to check one out.

I've got 8 4ft 4-lamp fixtures in my 26' x 21' x 10' and I feel like it still isn't as bright as I had hoped. 4 of the fixtures are from Menards and 4 are from Home Depot. I'm using 4100K bulbs, I'll probably end up replacing these with 6500K bulbs eventually.

This is the closest I've found. I ordered one of these to test out when I ordered some LED tube lights from the same seller. The valley between the two "ears" doesn't seem to fit quite right, but I think with some filing it could work. http://www.ebay.com/itm/301486796674

The plan is to re-route it when I run out of heating oil and make the switch to a Natural Gas unit mounted on the ceiling.

Got the last coat of latex up on the last two walls. Only thing left to do is to paint the trim and shelves with dark grey.

I'm looking for the same thing with the two lights I have mounted under my wall cabinets.

Thanks for the post. I've been wanting to get the hammer drill for a while, and having 2 more batteries just makes it better. Sent from my iPhone using Tapatalk