Search results

Ok thanks for all you comments.Hopefully nothing wrong with it.

Im in the process of grinding and chipping off the form seams/ridges on my 3ft high stem walls in my garage. Before i Epoxy i would like to apply patching materials to fill voids and surface defects. What material is best suited/recommended for this??? Keep in mind i will be Epoxing it...

RECox286 The compressor is fairly new. I bought it used. There was a short in the motor. When i brought it to the Electric motor service guy he said nothing about COO. A new motor was just to much $$$. Now its looking like the pump will have to be overhauled also. There is no sound of leaking...

im thinking now that maybe the motor's RPM is not up to what it should be after the rebuild.

Just had the motor rebuilt on a 30 gallon 1.6HP Kobalt compressor. I turned it on and from 0 psi to max 155 psi it took roughly 9min. Does this seem correct?? Also is the any method of determining if the belt is tight enough?? Thanks

Ill be insulating the two sides of my attatched garage that are not joint to the house. Do i still require a vapor barrier even thoe the garage is not heated?? Thanks

Ill take it apart tmr and post what i find. thanks

took the belt off and the motor is seized. can these motors be rebuilt??? if so what the average cost to rebuild?? thanks

No pressure in the tank

Both the pump and motor should rotate freely by hand force alone, correct??

My 30 gallon Kobalt air compressor will not turn on. I hear the motor make noise but the belt and pully wont rotate. I tried to turn the pully by hand(piston) and it takes lots of force to slightly move the pully. Is the motor seized?? Its a 120Volt 15 amp motor and keeps tripping the breaker...

Is that the narrow version?? If so, any problems when lifting pickups and bigger SUV's?? Thanks

perfect,thank you Just another ??? Would you happen to know how close the baseplate can be mounted to the edge of a concrete pad? (where the pad meets foundation wall)

From looking at the Bend-pak website, there floor plate 2 post lifts are available in two widths. My ??? is will the nerrow version XPR-9F be able to accomadate full size pick-ups and cargo vans?? thanks

i didnt see anything in the manual talking about "auto-close"

Maybe someone can help me with a problem with my Liftmaster 3800. The door operates fine. Opens and closes perfect. Problem being is that when i press the button to open it, the door opens fine, stays open for maybe 10min then closes by its self(without me hitting the Botton). any thoughts on...

I purchased the HD-9ST. Its great for cars but its a tight fit with mini-vans. for pick-up trucks id get the HD-9

The higher R value would cost an extra $200. The garage is not heated.

Need to purchase a new garage door. Im in a cold climate here in Toronto. My ?? to u garage experts. Would it be worth the extra $$$ to upgrade from a 1.5" R11 door to a 2" R15 door??? Also by having windows installed on the top panel of the door, wouldent that beat the purpose of having an...

Is it the place in Mississauga??? If so they quoted me $1695