Search results

My wife is a GC and had a few extra cabinets from a remodel she couldn't send back so I got them for my garage. They are super nice but I'm not quite sure how to utilize this 9" wide "spice rack" . Give me some cool ideas on how to utilize this thing to it's greatest potential. I'm thinking...

I have welder on a 50 amp. After lots of research Im just gonna pony up and do it correctly. Run a direct circuit. Got the oven free off next door so a $40 breaker and $30 for a few feet of 8/3 guess I gotta pay to play

So I have my welder on a dedicated circuit using 10/2 wire. So two hots and a ground. Of course my powdercoat oven has a nema 4 prong connection. I was thinking since the plug is near the panel I could just jump off my welder outlet and then run a dedicated nuetral over to the box . Mainly...

Lol I know, i have one, just took it off when I hung the osb sheathing.

Thanks for the advice guys. Here is my current setup. 3/4 pex, the joints are home depot sharkbites. After replacing my pressure switch and check valve and doing an oil change, everything is air tight. The pipe going up with a dead end cap on it will go to the ceiling and over to a hose reel...

Yep new oil is cull synthetic

Just changed my compressor oil. Tge prior owner put this in. The new Husky non detergent oil from home depot I got is crystal clear. Is it suppossed to look like this? Almost greenish diarhea brown.

Im trying to come up with a plan to run my air lines in my new garage. 5hp 2 stage 80g Sanborn black max compressor. Right now I have a 3/4 regulator and a 3/4 jumper hose and cut off. I figured I should just go all out and keep wverything 3/4 as I want to paint and sandblast. But looks like I...

Wiring up a 100amp sub panel run from the house. Had a lot of help from this board. What a great resource!

Thanks for the advice. I actually ordered this to replace my old valve. I wish I had known they made these before I came up with that craxy thing that rusted. At $7 its way cheaper as well.

Thanks for your help guys. I started installing the soffit baffles!

Success!!! Thanks for your help guys, i tried a bolt extractor again and really pounded it up there. Then torqued the **** out of it and the threads broke free! I cant believe it worked! You guys are awesome!

Ok I was using a pipe wrench. Went out and tried an ez out after soaking with pb blaster. No dice. Then as I was torquing on tbe bolt I felt a muscle in my chest feel like it popped. A rolled around in pain on the floor awhile and decided to give up for today. I need to go get some propane for...

Thanks, what kind of sockwt shoukd I try to put on this thing?

Move in day!

The head on the bung looks weird. Is there a special socket tool for it? I like tge idea of drilling out te old stuff and running a new tap in there to straighten threads. I have a small hand torch would that get it hot enough?

Done! Waiting on garage door guy!

Tough shed was great. Very happy with the quality. The city permits were the worst. I think tbe toughshed bare bones structure was 20k I might be off some. the pad ended up being 10k.

Micron gauge muat have been dirty. Its been running for a month no problems. I cant believe I pulled this off. Thanks guys!

I have a nice 2 stage compressor I had sitting ins storage until my garage was finished being built. Today when moving it to its new home the bottom drain valve broke off. It looks like the galavanized L connector rusted off inside. I thpught I could put a new bung in but its not moving. Ive...