Search results

what quick couplers, other than Snap On, fit the PH 3050? I have an IR air hammer and the quick coupler on it will not fit the SO. TIA.

thanks in advance

just curious on what those that actually have these pliers, and have used them, prefers. It's tough to beat the appearance chrome but I'm wondering if it would chip on a cutting edge? And of course if anyone has another brand of pliers with chrome plating, pls weigh in. I have an old pair of...

looking for a 1/2 drive metric impact socket set; I'll buy a deep set first. I've narrowed it down to SK, Williams, and Sunex. Plenty of good reviews for Sunex but I'd like to buy USA made if I can justify it. I like williams, and they are cheaper than SK, but SK comes with more sockets. So...

Bought a set of SK torx bits and the T47 looks like it has a different form than all the other bits. It is the one on the right in the pic below. I would assume that, like all the other bits in the set, they have the same basic form and just change size. But this one bit has a different form...

I was going to place an order and added several items to my cart. I went to check out and had an empty cart. I tried again and same thing. Anyone order recently?

looking for some torx, security torx, and maybe some metric hex bit sockets. I'd get wiha, the price is great, but they don't stamp the bit size on the sockets - this isn't a dealbreaker but bothers me. Does SK stamp the bit size on the socket? Opinions on the SK? Opinions on Wiha? Any...

I'm looking for a large pr of diagonal cutter pliers. What's the difference between the Knipex 7401-10 and 7491-10? Any other suggestions?

I have a 10-15 yr old B&D 14" chop saw. I don't use it very often, only a few times a yr, so it hasn't seen much use, few cuts at a time. I've never liked it and have always regretted not getting a makita as I was debating between the two at the time. So, I tried to use it yesterday to cut...

prefer US made and I'm not going to pay Snap On $. Oh, and something I can buy new. I've been buying the US made Williams sockets but they only have 12 point in 1/2 drive metric- which is the exact opposite of what you'd expect they should make if they were only going to make one style (6 vs...

Does williams make a spanner-type-thingy to remove the round slotted nut from the 3/8 and 1/2 ratchets? I'm not going to use a chisel, etc, and can certainly fab something up, but if I can buy something for $5-10 then that's what I want. I've already tried various ways with no luck and dont'...

Ok, I've spent hundreds of $ on plastic from Ernst with multiple orders and have been frustrated by their crappy website each time and finally gave up tonite. You'd think they'd have a functional website since it's not 1994. But evidently that's too much to be expected. when I use their...

I have two of the plastic HF blast cabinets which I've had for 10+ yrs and am happy with. The problem is the nozzles for the gun. For yrs HF sold ceramic nozzles which were fine, but then they stopped making them. After that I bought them from Eastwood and of course they were 5X more...

I have an old tube of this (~15 yrs) and looking for a source to reresh my supply. i can't find it on McMaster which surprises me. Is it the same name/PN now? I can find the PN on google but only a few vendors show it. If not permatex, is there another product that's ~ the same? TIA.

new stuff, I don't do small engine work anymore and need to clear these out. tecumseh needle and seat - 4 pcs tecumseh carb kits - 2 tecumseh carb jets - 2 tecumseh condensers - 4 tecumseh points - 2 tecumseh ? carb float - 1 B&S points and condenser - 2 B&S carb jet PN 395508 - 2 coil- not...

I had some rusty vintage Allen brand hex wrenches so I decided to clean them up. I have tried all the hot and cold phosphating/blackening chemicals and generally use Metal Ready by POR 15 when possible. It's reasonably priced and works well as you can see. Note none of the typical blackening...

I realize these have been discontinued and I've never seen these in person. Would they be similar to Craftsman Professional?

OEX style: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1. The 9/16 doesn't match the rest as far as condition as it replaced a missing one- that's the best I could do on Ebay. As you can see the plating is thinned out as compared to the others. The 1" has a few dings on the open...

very nice shape, both work great. Slotted driver tips do show some wear. one drill bit is missing per the amt of storage holes in the drill handle vs what is here. Dunno how old these are but definitely 30+ yrs old. The box for the driver is in nice shape; no box for the drill. hopefully...

anyone bought one lately? I bought both a 1/4 and a 3/8. The 1/4 is great, no issues. On the 3/8, the first one I received I just about needed a pair of pliers to move the lever to reverse directions- definitely not right. They sent another 3/8, and it's better, but still not what I would...