Search results

How do you use the compressor? impact wrench/ratchets, painting, etc??

May want to consider space for the Blazer tops? Is the 70 model the orangy red color? Use a wire mesh reinforcement in slab and wrap bottom of the post in expansion material to avoid slab cracking near post corners (or build frame all on top)..welcome

Good hoses- The 3/8 Goodyear rubber or pliovic Legacy rubber Just be sure you have the fitting setup you prefer. I prefer male/female fittings. Some hoses come male/male. You can of course put coupling for extensions but just another fitting to come loose. Use Milton couplers. "style M" or...

I spent 4 days in Ohio once..welcome

Eastwood carries a salt nuetralizer. We used a product called SaltX as a preventive for minimizing road salt corrosion of car shipped from Michigan to Georgia. Dillute per instructions and apply by a pump sprayer or pour..

welcome from GA

You may want look at plastics converters that can supply sheet on a roll? Other materials are polypropylene (needs special inks), Kydex, polycarbonate (for higher temps). PVC keeps white color well but gets brittle over time / or cold but very low $. Here are a few sheet folks- AIN Plastics...

..what is the auction address? I'll check them out and start a bid for you..:)

Would hold pressure but be insulating for heat/pressure related vapor condensing to water.

Close by..PM me if you need any assistance. Less than 30 minutes away..

I just run 25 foot of 3/4 pipe sloped with a short five foot return (yes could be 1/2") for my Speedaire 2HP portable compressor, One moisture/water collector at end. My understanding is the high psi compressed air requires about 25 foot to allow moisture vapor to condensate to liquid. Then I...

welcome from north of ATL.

Joint terminology- simple internal swaged joint- no new I.P. here.. unless the slot is to prevent rotation some how- I'd reverse the slot to opposite part.

welcome from GA

sleeve it on the inside or outside. Rivet one end with 2-3 rivets around the tube or braze (diy). What size tubing?? material? aluminum or steel We do this method on low cost aluminum towers for boats. www.fishmaster.com

Welcome from the north side of ATL..GA

Bostich gasketed boxes at Lowe"s or HD? what SoouthernBuild listed. I have one works great for my chainsaw tools.

Welcome from Alpharetta- just far enough way from Atlanta.

when can I start bringing over stuff to store in your new building SpotCo2 stores BIG tree branches in his storage buildings but he is a good neighbor to know..

Grey (Gray) can be either warm gray or cool gray. I had same problem with color too warm (yellowish) or pinkish or lavender. You need to cool high K rated CCFL bulbs or natural white light traditional bulbs. I recommend checking out Sherwin Williams colors. Adding more white or black will not...