Search results

Whenever I have an item that is too big for my containers, I make a temporary container (I always use screws so can easily take it apart). Just use some scrap wood to make a box big enough for the item. It can even be just a frame, not a box (as long as it is strong enough not to collapse. If...

Anyone that has a scale, can you weigh a cup of citric acid to see how much it weighs. Same with washing soda. Trying to convert the original formula's weight 40 grams Washing soda 100 grams citric acid powder into a volume equivalent for those of use that don't have a small scale. Also trying...

I usually use Citric acid to remove rust, but decided to try this. I don't have a scale and wasn't sure how to convert the stated metric masses into Imperial volumes. I filled a container (about a large man's size shoe box) 3/4 full of water, added 2 scoops (approx. 1 1/4 cups) of Citric acid...

How did it work out?

Thanks everyone for all the responses. 1) SPIN-DOWN: There is a debate about spin-down after the grinder is shut off. Many feel that long spin downs indicate that the bearings are in good condition and the grinder is well balanced. Others feel that the bearings are dry and need to be replaced...

Thanks everyone! Doerr. Was that a good manufacturer? I'm assuming the model number is 2Z341G (the cat no? Is there any way to tell what year this was made? Does the LR-15562 number in upper right mean that it was made in 1962 or does the "C78" in the Motor Ref mean that it was made in 1978...

Picked up an old Dayton bench grinder for $30. Looks like it is 1/2 HP, 3650 rmp and has 5/8" arbors. Can anyone tell me any info about it? I.e. what year was this made? Model number? Did Dayton make it or was it made by another manufacturer? I turned it on and after shutting it off, it spun...

Thanks Jay but I cannot machine the sleeves. Can they be bought? If so, what is needed?

Jay, do you have current links for the sleeves and casters? I've searched on Amazon, but can not find either. Thanks

I have a simple toggle On-Off switch on the craftsman motor to my Drill press. Was wondering if a toggle replacement switch exists with Forward - Off - Reverse that I could replace mine with. Would be nice if I could add reverse to the dp easily.

Hey Frank, I decided to take your advice and not cut the column for now and keep it at the current height. If I decide to cut it in the future, I always can. Now, I have set up my multi-speed attachment. Now I need to set it up. What is a good overall speed to set it at? I will mostly be doing...

Thanks Frank, the extra 5" on the older model columns makes sense based on videos I've seen. My DP will be on a base with casters too. Will probably add another 2" - 3". I was thinking how I would cut it. Was going to use an angle grinder, but I like your method better. Will see if I can set up...

I'm restoring a Craftsman/King Seely 100 (about a 1947-48) saw (floor model) and I'm wondering what is a good height for the drill press. Currently, it is about 69 1/2" from the floor to the top of head casing (in the front) or 66" to the top of head casing in the rear. This seems higher than...

Is there a way to see the discounted items?

What benefits does the Garage Journal Super Secret Discount Club have and how do you use it?

These are the dimensions I get with my cheap caliper Outer = 35.05 mm Inner = 14.96 mm Width = 12.35 mm

Can anyone tell me what the modern replacement would be for this old ball bearing (probably from late 1930s? It is an SKF and has "No FL-15" stamped on it. Also has stamped "Made in USA", on the inner ring it looks like it has "DC" and "15"

There were two set screws on the pulley itself, but no set screws on the key. To remove it, I gave it a quick squirt with some PB blaster and after a while, just pulled it off with my bearings puller. Came off easy. Now, going back on my will probably be more difficult. I'm not sure if I put...

I want to replace this bearing (it is an SKF if that matters). As you can see in the images, there is some kind of metal washer/sleeve pressed up behind the bearing. I took a screwdriver and was able to bend the edges back away from the bearing slightly, but it is not moving. If it was not there...

Thanks everyone, I got it off.