OP
When they were cheaper, like $8 plus the old 20% off coupon, I would buy them to rob the casters off myself. You couldn't beat the price for 4 casters.
Above 1200 Sq/FT Garage Refurb®
- Thread starter NUTTSGT
- Start date
Wokspaces above 1200 squarefeet.
OP
I couldn't help myself and hoped to stack a 15% coupon but it didn't work. I know some have had luck doing but I didn't. . . didn't stop me though.
I've considered this for awhile since I got the new boxes and being this close to the press.
I wanted to put all my press "related" stuff in here. Like this
I've considered this for awhile since I got the new boxes and being this close to the press.
I wanted to put all my press "related" stuff in here. Like this
OP
First, move press out of the way and hang box.
Move pressback and find issue....
Problem solved by cutting about 3/4" off the rod and turning it around, inserting from the back side.
Move pressback and find issue....
Problem solved by cutting about 3/4" off the rod and turning it around, inserting from the back side.
OP
This box will give some room to grow for the future.
Bottom drawer, all flat steel I've used during pressing.
Room stuff in the next drawer up.
Bottom drawer, all flat steel I've used during pressing.
Room stuff in the next drawer up.
OP
The middle drawers, automotive related 
Bearing separators.
Since they are not something I use alot, I bought the one set awhile back and picked up the larger one yesterday.
Bearing separators.
Since they are not something I use alot, I bought the one set awhile back and picked up the larger one yesterday.
OP
Then the top two drawers are for the press itself, like pump handles and spare rods for the pkates.
Very top drawer is just the rebuild o-rings for now...like said room to grow. I'd like to pick up another set of press plates or blocks, possibly a small press brake
Very top drawer is just the rebuild o-rings for now...like said room to grow. I'd like to pick up another set of press plates or blocks, possibly a small press brake
OP
Couple of more pics.
Here's clearance I gained cutting the rod down.
How it lays out
Here's clearance I gained cutting the rod down.
How it lays out
It will surprise you how quickly those drawers will fill if you start pressing bushings, bearings, etc.
Every job requires at least one new piece. Then it gets saved for next time.
That side box is a perfect fit.
bugnut
ALLIANCE MEMBER
Eric, looked like a busy time over the weekend with the train jumping the tracks. Suspect your crew was very busy. Take care..
OP
OP
Yes, it was busy and thanks. The duty crew and in coming off duty guys spent all night out there.
OP
Got a top cut for the side box and some polycrylic on it.
Looks good on the box.
Looks good on the box.
OP
Picked up a few things for an electrical upgrade today.
