Gearwrench 120xp Ratchet Promotion

[Mike-Trident]

Mike, I'm considering placing another order for a few other things before the sale ends. Can you get me prices and a set of metric offset ratcheting wrenches. Maybe part #9602? Also curious of the price of mid length sockets in 1/4 and/or 3/8 drive.

Thanks!

Just now saw this...

Hey AH, I found pricing on the 9602N or RN. The n is on a holder,the RN is in a pouch. Both are the same price. For GJ folks, the price is $245 shipped. You have to call in on this one because we don't have the part loaded on the website yet JUST yet. By the time you read this, it may be, just do a search...

For the rest of them:

GearWrench- 10 Pc. 1/4" Drive 6 Point SAE Mid Length Socket Set

GearWrench- 13 Pc. 1/4" Drive 6 Point Metric Mid Length Socket Set

GearWrench- 11 Pc. 3/8" Drive 6 Point SAE Mid Length Socket Set

GearWrench- 14 Pc. 3/8" Drive 6 Point Metric Mid Length Socket Set.

If you have any problems on the website, let me know. You can call me at 972-961-4656, x103.

Mike

 

[Mike-Trident]

Bellydancers.......nice!

Trident, have you considered becoming a 'preferred vendor' of garagejournal via the Alliance?
http://www.garagejournal.com/garage-journal-alliance-discounts/

Thanks for the info, I just signed up. I am sure that we will do a nice promotion for GJ users.

 

[toolstools]

$245? How many pieces is that? Maybe its just me not knowing what it is, seems a little steep in my non expert opinion.

 

[Fedwrench]

$245? How many pieces is that? Maybe its just me not knowing what it is, seems a little steep in my non expert opinion.

My catalog phu says that a Gearwrench 9602 is a 16 piece Gearwrench reversible combination wrench set that runs from 8-25mm (minus 20 & 23mm). $245 is steep.

Check these links:
http://www.nationaltoolwarehouse.co...c-Rev-Combo-Ratcheting-Set-P179195C30003.aspx

http://www.amazon.com/dp/B000HBDWSY/?tag=atomicindus08-20

 

[Mike-Trident]

$245? How many pieces is that? Maybe its just me not knowing what it is, seems a little steep in my non expert opinion.

They are an expensive set, but I bet I can knock them down to $205.

EDITED:
I really should have researched cost a bit better. Every cost I uploaded is based on a fixed markup. I need to go in and adjust markups based on dollar value.

 

[rono]

seems like the sales is over, guess that a good thing for my wallet.

 

[Mike-Trident]

seems like the sales is over, guess that a good thing for my wallet.

Rono,tell me what you are looking for and I will let you know if I have it or have it in order so you can get the promo pricing.
Mike

 

[toolstools]

Mike, could you hit the new post button on the banner, I have a special post waiting for you and your opinion/approval. Thanks

 

[Mike-Trident]

I hit it, But I must be missing something. What am I looking for after I press new post?

 

[toolstools]

http://www.garagejournal.com/forum/showthread.php?t=204783

Thanks for your time to read that. Post your ideas in that thread.

 

[cheechi]

They are an expensive set, but I bet I can knock them down to $205.

EDITED:
I really should have researched cost a bit better. Every cost I uploaded is based on a fixed markup. I need to go in and adjust markups based on dollar value.

I am sure that we will do a nice promotion for GJ users.

See this isn't the same old 'Im in retail how much can I get' attitude that I hate. I will happily buy more stuff from you just based on that. Don't change.

I used to work for a small company who had that attitude, got big (for a local company) enough that they didn't think they had to think that way anymore. I worked in repair though, maybe I had no business caring about the retail part to begin with.

 

[mscribellito]

Mine were delivered today! Can't wait to get home and open them up. I'm swapping motors out this weekend in two fox bodies so I am sure they will get plenty of use! It was a pleasure doing business with your company, Mike. You have definitely gained a faithful customer!

 

[Taylor-Trident]

Mine were delivered today! Can't wait to get home and open them up. I'm swapping motors out this weekend in two fox bodies so I am sure they will get plenty of use! It was a pleasure doing business with your company, Mike. You have definitely gained a faithful customer!

Thanks for the comment! Let us know how they work for you. We are always looking for feedback on our tools!

 

[madmike64]

I won a 3/8ths around Christmas online promotion. I have had nothing but positive things to say about it.

 

[bimmerZ5]

I won a 3/8ths around Christmas online promotion. I have had nothing but positive things to say about it.

i have 1/4, 3/8, and 1/2" in the standard chrome handles and agree totally. With this deal, I bought all the flex head sets too. Honestly, if Gearwrench made these in more varieties, such as the 24" long 1/2" flex head or something, I think these ratchets are a Snap-On killer...

 

[Chadwilliam1]

I haven't received mine yet but are they strong enough to handle a 24" handle?

 

[DENALIAKITAS]

Not to complain ( because i am not) but for your benefit you need to consider shipping in a more appropriate sized box. I received my rathets in a 20x16x12 box. Way overkill. I ship things everyday (car parts) and know that using to large of a box will kill your bottom line when it comes to shipping costs even with substantial FedEx commercial discounts.

 

[bimmerZ5]

Not to complain ( because i am not) but for your benefit you need to consider shipping in a more appropriate sized box. I received my rathets in a 20x16x12 box. Way overkill. I ship things everyday (car parts) and know that using to large of a box will kill your bottom line when it comes to shipping costs even with substantial FedEx commercial discounts.

it might just be that they didn't expect so many orders and ran out of the proper size boxes but still wanted to get the product to the customer in a timely manner.

 

[Taylor-Trident]

it might just be that they didn't expect so many orders and ran out of the proper size boxes but still wanted to get the product to the customer in a timely manner.

bimmerZ5:
You are absolutely right! We just weren't prepared for this awesome turn out.

 

[Mike-Trident]

it might just be that they didn't expect so many orders and ran out of the proper size boxes but still wanted to get the product to the customer in a timely manner.

Gentleman:
Normally, we reuse boxes that we have. We get so many in, it is wasteful to buy new ones, HOWEVER, once we started shipping orders out, we nearly ran completely dry and were scavenging for what we could find.

Solution: We bought two pallets full of different boxes. We took about an hour trying to fit different combinations of products and material in boxes to find what we needed. We should be good now.

Mike

 

[Mike-Trident]

SPECIAL REQUEST.

Folks. I am EXTREMELY grateful for the compliments you have given our team.
If I may ask a small favor of those who have received their products... Could you please go to our Facebook page and under the review section and write us a review? Good bad or ugly, honest reviews would be great. It would mean the world to us.

CLICK HERE FOR OUR FACEBOOK


Mike


ALSO: If you have posted something and either myself or Taylor have not responded, please message us as we may have missed it...

 

[Mike-Trident]

I haven't received mine yet but are they strong enough to handle a 24" handle?

Chad, what product did you order?

 

[Chadwilliam1]

the three piece set of 120xp 1/4,3/8 and 1/2

 

[Mike-Trident]

the three piece set of 120xp 1/4,3/8 and 1/2

EHH.... let me ask my rep in the morning. I am not sure what he is going to say. I would hate to give you bad info.

Mike

 

[Carlos Iglesias]

EHH.... let me ask my rep in the morning. I am not sure what he is going to say. I would hate to give you bad info.

Mike

I would prefer to order from a small businesses. Coincidentally I was planning to order the same set this week and have had it in a Cart elsewhere, so I'd be interested as well. Looking forward to doing business together!

Salud,Carlos

 

[Mike-Trident]

the three piece set of 120xp 1/4,3/8 and 1/2

Hey Chad:
That is located HERE

I have enough stock on order to sell at the sales price, but please do not use the 10% discount on this, however you can use the free shipping discount.

Mike

 

[Chadwilliam1]

mike I already paid for it on Thursday night. order number 13266. I am still waiting on shipping conformation.

 

[Mike-Trident]

mike I already paid for it on Thursday night. order number 13266. I am still waiting on shipping conformation.

Hey Chad: We have an order arriving today. I THINK, but won't be sure until we do today's shipments that yours may go out. I will advise today when all shipments leave (plus you will receive an automatic message from the store with tracking.

Mike

 

[Mike-Trident]

Chad, what product did you order?

Hey, I just spoke with our rep. He does not advise using an extension/cheater bar. But I guess the worse that would happen is you need a rebuild kit.

Mike

 

[Chadwilliam1]

nobody ever recommends putting a cheater on their product. do you sell rebuild kits? I like to keep rebuild kits for my ratchets on hand.

 

[rono]

Got my first package, spent the morning flipping through the catalog. Love that you guys use FedEx over ups, got my package in 3 days rather than 7. Can't wait for my second order to ship. Thanks guys.

 

[bimmerZ5]

Got my first package, spent the morning flipping through the catalog. Love that you guys use FedEx over ups, got my package in 3 days rather than 7. Can't wait for my second order to ship. Thanks guys.

yeah, much prefer FedEx myself too... UPS always breaks stuff on the way to my house. However, tools usually survive as they are not as delicate.

So, there's a catalog included? what does it cover? or, is it a Gearwrench catalog?

 

[rono]

yeah, much prefer FedEx myself too... UPS always breaks stuff on the way to my house. However, tools usually survive as they are not as delicate.

So, there's a catalog included? what does it cover? or, is it a Gearwrench catalog?

It a 60 page catalog of things they carry, just couple items from each company it seems. It funny that gearwrench is not even in it.

 

[Mike-Trident]

Hey Chad: We have an order arriving today. I THINK, but won't be sure until we do today's shipments that yours may go out. I will advise today when all shipments leave (plus you will receive an automatic message from the store with tracking.

Mike

Chad: Good news. Your order arrived and will ship today.
Mike

 

[Chadwilliam1]

thanks, I am just getting anxious.

 

[HOOT40]

I have not seen confirmation on my order from Friday?

 

[Taylor-Trident]

Hi Hoot40:

I'm sorry we did not reach out to you personally. All of your items you have ordered are on back order from the factory and as soon as we get a clear ship date we will update everyone.

 

[Refractometer]

Well, you kept the 3 piece 120xp Father's Day promotion open long enough, I finally broke down and ordered a set. Thank you!

 

[Chadwilliam1]

nobody ever recommends putting a cheater on their product. do you sell rebuild kits? I like to keep rebuild kits for my ratchets on hand.

in case you missed this question.

 

[Mike-Trident]

I have not seen confirmation on my order from Friday?

Hoot, We just finished shipping everything that arrived for today. Let me know your order number if you did not receive your shipment notice and I will be more than happy to research it for you.

Mike