Search results

I’m looking for ideas on how to store some wood in my garage. The things I‘m dealing with are half a sheets of plywood, some 2x4s full lengths and pieces, chunks of 4x4s, etc. Basically things leftover from a specific project that are too big to throw away, but have a tendency to take up a large...

Does anyone make long extension sockets like Gearwrench 84980, but in 1/4“ drive?

Is there a non-destructive way to remove this type of press on wheel nut? If there isn’t what’s the fastest way to get them off?

Why doesn’t anyone make a flex head cordless ratchet? It wouldn’t even have to flex too much, something like a flex head torque wrench. Sometimes having 10 - 15 degrees of flex would be all that is needed to get into a tight spot.

I bought a used long neck Matco Infinium 3/8" ratchet. It worked perfect out of the box, but it was dirty so of course I took the head apart to clean it and grease it. Now I can't get it working again. There are 2 wavy washer springs that should be putting pressure on the anvil piece and it's...

Can someone please tell me the ODs on the box end of the SK x-frame wrenches? I'm considering buying some, but when looking at pictures it looks like the diameter is much larger than the wrench size. If no one has measurements could someone compare the ratcheting head to a different ratchet...

eBay has a 15% off coupon on 9-27-18. Minimum purchase $25, max savings $100. From 10:00 AM - 6:00 PM PDT. coupon = PICKSOON https://pages.ebay.com/promo/2018/0927/69157.html

What are the thoughts on my idea to buy some replacement gold snap on torx bits and use them in regular sockets? I would only be using them at home and I am only looking for some of the bigger sizes (T40 - T55). The replacement bits are around $10/each while the complete socket is around...

Wrong thread. Sorry, this can be deleted. This information is in the hot deals section as well. 15% off purchase of $50+ max of $100 discount. Good 5-4-18 from 8:00 AM - 4:00 PM PDT. You should be able to add multiple items to your cart and checkout once with the code: PMAY4TH

Zoro is having a flash sale on 8-2-17. 25% off $250 or more from 10:00 - 2:00 CDT. The code is FLASHY The rest of the day is 20% off $250 or more with the code ALLDAY20

$15 off $75 ends at 8 PM Pacific time on 6-23-17. https://pages.ebay.com/promo/2017/0623/4483.html code = PSUMMER15OFF

I was looking at some flex head ratchet wrenches and I came across the Matco SRFM102PA wrenches. I know Matco doesn't make much of anything themselves so I did some more looking and found the Mountain mtn9410 wrenches which appear to be the same and cheaper. Does anyone have experience with...

The title says it all. $15 off $75 until 9:00 PM PST CDECFLASHSAVE

I have a Wright chrome socket that has pliers tooth marks. Think of the marks made by grabbing something with a big Channellock or vise grip. I know the damage is permanent, but I'd like to try pushing the metal back down and making the socket smooth again. Any suggestions on how to do that...

Does anyone have any experience with the made in Vietnam Wiha bits? I'm specifically looking at the 76094 set in which the bits are about 3.5" long. They are for getting down to recessed screws with a ratcheting screwdriver. If anyone has any other suggestions I'm open to looking as I don't...

This started with an O2 sensor replacement using a crowfoot. I ended up using the Snap On FZ1 pieces to make an extension to get around the exhaust pipe that was in the way. The thing I noticed was many of my extensions did not have the male and female ends aligned which causes a problem with...

Anyone have an information or opinions about Dayton wet/dry vacs? Based on the design and cosmetics they look like they might be related to the shop-vac brand. Zoro sells Dayton and I'm putting a wish list together for a hopeful 30% sale.

I have a Snap On YA642 floor jack (the same as a Lincoln 93642 Series C) that I am restoring. I have taken it apart, cleaned it and repaired a few items. Now I am about to paint it and put it back to work. The question I have is should I paint all the little parts first before assembly or...

I just bought a brand new set of Wright satin SAE wrenches 3/8" - 1" (set 711) on ebay. Asking price is $95 (I offered $85 and it was accepted) which in my opinion is a very good deal. There are 5 more sets available as well as some larger sized individual wrenches. Search for Wright 711

I'm looking at some Knaack chests and am seeking opinions between the Classic and the Jobmaster. Specifically the Classic 2048 and the Jobmaster 4824. They are almost the exact same size (Jobmaster 1/4" taller) but the Jobmaster weighs 13 pounds more and costs ~$125 more. I am hoping the extra...