Search results

  1. 4

    Assorted Snap On, Mac, and misc.

    Just in time for your black Friday shopping I present this assortment. First 2 pics, Cj93B slide hammer puller set, in original box, box is pretty beat up, I had to tape the corners, second pic shows broken attachment, not sure how this attachment is even used, maybe it could be welded...
  2. 4

    Snap On TML70A update to finer tooth?

    I have a Snap On TML70A 1/4 drive ratchet that is in need of a kit. The ratchet action is pretty coarse. Do they have a finer tooth action that can be installed in this ratchet?
  3. 4

    Vintage emergency ignition coil

    I had this thing for years, kind of bizarre, never saw anything like it. Anybody seen one, or better yet, used one? 6 volt, says it will start a car with defective points, how does it know when to fire?
  4. 4

    50 in. lb. torque wrench, Machinist's Practical Guide

    Torque wrench SOLD, thank you Joel. Machinists guide is sold as well, but I have a couple more copies, so still available. Sturtevant DR50-1 torque wrench, 3/8" drive, up to 50 in. lbs. Nice shape, made in USA, this type of wrench is excellent for measuring break away torque, like when setting...
  5. 4

    Walker 798 Unit-Lift mechanical trans jack

    I was given this jack a little while back, saved it from the scrapper. Anyway, used it for the first time last week to replace the rear end in a Jeep Commander, worked awesome! Has 1 small issue, I suspect the little lever that ratchets the screw is supposed to be spring loaded, this one isn't...
  6. 4

    Anybody in the rust belt used 1 of these hub pullers?

    https://www.thetoolwarehouse.net/atd-tools-8629-P294963.aspx?utm_campaign=Weekly_Email_061218+Summertime+Savings+%28HKk8dF%29&utm_medium=email&_ke=eyJrbF9lbWFpbCI6ICJqaW1fYmlzaG9wQHZlcml6b24ubmV0IiwgImtsX2NvbXBhbnlfaWQiOiAiSnpRVXZMIn0%3D&utm_source=.TTW_Broad_Deals Does it work for badly rusted...
  7. 4

    CDI torque wrench, inch pounds, dial type

    Real nice CDI inch pound torque wrench, has metric markings as well, 3/8" drive, with case. Real nice shape, works perfect, no issues. Made in USA, pretty sure this is the OEM for Snap On Torquemeters. These work nice to read break away torque like when setting up rear ends and such. $40. plus...
  8. 4

    FS Hanson Ace Super Set Tap & Die

    FS Hanson Ace tap & die set, covers 4-40 thru 1/2" in both coarse and fine, as well as 1/8" NPT. Made in USA, super nice shape, most pieces appear to have never been used, includes the handles as well as a thread pitch gauge. Has a slot for a screwdriver that isn't there, not sure if it was...
  9. 4

    Snap On TDM-117A Metric Tap & Die Set

    Snap On TDM-117A metric tap & die set, real nice shape. Top quality 12 point adjustable dies, makes it nice to adjust for different class threads, as well as being able to drive them with a common socket if needed. Doesn't appear to have seen much use, it's missing 1 tap 4MM X .75. Not sure how...
  10. 4

    Binks Airless 1 spray gun brand new

    SOLD Brand new Binks Airless 1 spray gun, complete. $220 includes Priority Mail shipping in the lower 48. Thank you, Jim Bishop PM, email or ph 508-866-584zero
  11. 4

    FS Ridgid E110 hexwrench, Irwin Hanson tap & die set

    Couple items for sale. First up is a Ridgid E110 offset smooth jaw wrench, excellent condition, no issues, $20. Next up is a 12 piece Irwin Hanson tap & die set for small machine screw threads. Includes taps and dies for 6-32, 8-32, 10-32, 10-24, and 1/4-20, as well as a tap wrench and die...
  12. 4

    Recognize this Craftsman crown stand?

    Went to a yard sale today, they made me an offer I couldn't refuse on a Delta table saw. It came on this stand. What was it made for? It has a motor bracket and electric outlets inside it.
  13. 4

    Need help to ID Snap On carry box

    Picked this up today at the flea market. Went thru most of the catalogs and pics on the Collecting Snap On site, can't find it. It's about the same size as a KRA251A, but has a removable tray and unlike pics of the KRA251A I saw, it uses 3 conventional hinges rather than a piano type hinge. It...
  14. 4

    Cool tiny outside caliper, Rooster brand???

    Found this little gem at the flea market this AM. Seems to have owners initials on 1 side and a rooster (?) stamped into the other side. Any ideas who may have made it? Anybody have any other machinist tools with this logo?
  15. 4

    FS Ridgid Pro tubing benders

    I have for sale 3 Ridgid tubing benders, excellent condition #394 1/4" 9/16" radius $20. #398 1/2" 1-1/2" radius $30. #358 5/8" 3" radius, this is a ratcheting bender $75. works slick, like new Or buy all 3 for $100. Prices don't include shipping, will ship most reasonable way I can, or pickup...
  16. 4

    FS Autobody collision pulling clamps PF Porter Ferguson

    For sale - a pair of Porter Ferguson collision repair pulling clamps. They have reversible jaws, excellent condition. I'm including the hook shaped puller shown in one of the clamps. Sell for $100 for the 2 clamps and the hook, shipping not included. Pretty sure I can them in a small flat rate...
  17. 4

    Couple vintage mini hacksaws, 1 Snap On, 1 needs ID

    I've had these mini hacksaws for a long time, 1 is a Snap On, other needs an ID. It just say "No 2627" on the handle, nothing else. I got it in a used tool box purchase about 40 years ago, and iy was old then. Any idea on a maker? Also, are blades available for the Snap On? Thanks.
  18. 4

    Strange vintage double end adj. wrench

    Went to a car show today, they had a small swap meet there as well. Came across this little double ended adjustable wrench, never saw any thing like it before, so of course I had to buy it. Forgot to put something like a quarter in the pics, it's about 4" long. Also scored a cool metal tap drill...
  19. 4

    How big a motor for this Speedaire compressor pump?

    At a shop where we work on our hot rods there are 2 compressors, a large horizontal with a Kellogg 331TV pump, 5 hp, and a rather sad old vertical that I never paid much attention to. The 5 HP motor on the horizontal appears to have burnt out. Been using the vertical, but it really doesn't put...
  20. 4

    Is this a genuine IR anvil, or a counterfeit?

    I ordered what was supposed to be a genuine IR anvil for my 2135Ti, part # 231B-A626 from a seller on Ebay. Item shows up in a plain zip lock bag, nothing to ID it as genuine. Seller insists it is, says you can tell by the twin hammer logo. So I pulled the OEM broken anvil out of the gun, logo...
Top Bottom