Search results

Was watching a youtube video this afternoon that someone sent to me to ask if it was correct. Starting at 4:40... Yes or no???

Do I need to put the electrical outlets that are mounted on the ceiling for the garage door operators, a couple of LED fixtures, on a GFI circuit breaker? If I add a pull down drop light, can that be on the same circuit, or should that one be on its own GFI breaker? thanks Junk

Today, my garage door would only open about a foot, and then it would stop. I have been having problems with this door a lot this winter with it not wanting to close, until I adjusted the down pressure. I got out the ladder, and climbed up to see what was wrong with the torsion springs, since...

I have been looking for a new box for a while, and I have finally settled on wanting a Snap On box, after looking at a bunch of other brands. I want a box with 29" drawers, and found a KR1000 box. Did some searching on the forums, and all the threads are from a number of years ago, when it...

I was working on my 1962 Chevrolet, and needed my clutch head sockets, and when I took them out, I noticed that the chrome was pealing on a couple of them. Haven't had a need for these for a very long time, so they just reside in the tool box drawer. When I started looking for the part number...

I believe that this is from the 1940's or early 1950's. It is a service station oil collection container by Lincoln. I recently drained out all of the old oil, and there might be a slight amount left. It is in very good condition for its age, and all original paint. I am selling it because I...

Anyone up for this? :confused:

I bought a Stanley Bench Grinder a while back, and I am just getting back to completing it for use. I removed one grinding wheel, and the paper tag on the wheels was a 7"x1"x1", that was worn down to about 5". I want to replace both wheels, and have one coarse wheel, and one medium wheel. I...

Looking for a craftsman variable speed drill press attachment that has the speed change lever at the top of the headstock. The model identification plate is missing from the bottom of the drill press, so I am posting a picture of the headstock for reference. Best that I can tell, it is a model...

My Hein Werner jack just started leaking from the cylinder. I was wondering about the possibility of just fixing this one seal that has failed. The jack has worked well for many years, and I am hoping not to have to get into the valve. This is the reason for just replacing the piston leaking...

I found this grinder today, and decided that I couldn't live without it. One side has a home made tool rest, and even though the data plate says it is 220 volt, someone has wired it to run on 110. I would like to find the correct tool rest, and also a wiring diagram to wire the unit to run on...

70 gallon Bock oil fired water heater, in like new condition. It is about 8 or 10 years old based on my memory. We recently upgraded to Propane heat and hot water. The replacement cost on a 67 gallon Bock water heater on line is $3365, and I would like to get $1750 for mine, or a "best...

I am tired of buying crappy plastic hose reels, and have been looking for a good quality hose real that will hold a 100' 5/8" rubber hose. Ideally, I would like one that would hold a 150' hose, but I doubt that there is much of a possibility that one exists. Prefer one that is free standing...

Need a Kent Moore J-9231 Specialty Wrench for adjusting upper ball joints on 1961 and up Cadillac. Would consider other brands, such as Snap On, if it is the same design tool. thanks

I saw this last year, and thought it a good idea, and was wondering if it has been discussed here yet? I did a search, but couldn't find anything. My thoughts are that this would be a great addition for BendPak to make for their 4 post lifts to increase the versatility of them.

I bought this hose reel almost 15 years ago at a swap meet, and never got to mounting it, because I don't know how to get to two of the mounting holes. There is no manufacturers name that I can find on the reel. I need to remove the part that the hose rolls up on, so I can get to the mounting...

I heard a bang in the garage, and went to investigate. Didn't see anything, until I tried to open the garage door. It wouldn't go up, and that is when I noticed that the torsion spring was broken in half. Now, for the history of this door. Originally, it was a 9' wide 4 21" metal insulated...

I have a number of older Snap On tool boxes, and have no keys for the locks. I know that I can order replacement keys by the number on the face of the lock, but that will leave me with a ring full of keys. Is there a place that I can get a bunch of locks that are keyed alike to change out all...

The water well control switch failed on my system, and I replaced it using all the old wiring. First question. I was wondering if it is still acceptable to use Romex from the electrical panel to the switch, and from the switch to the well control box, or should it be liquid tight conduit, with...