Search results

Morton set my floor height at four inches up from bottom if the splash board. Now is find they put the trim and weather strip for the door at 3 inches. They say I am suppose to taper the floor down to that. All building gs I have seen have the floor same height and the concrete tapers outside...

I understand the splashboard is the form for my floor in my Morton building. I'm on 9vacation foot centers. Have there 2x8 plus my 2x6 butted tight under theres. I have 2 inch foamboard on inside of that. Now I am back filling on outside. Question is do I need to stake the boards or is it going...

Do I need the vapor barrier behind my vertical pieces of foam board or just under the foam for the floor

According to Morton buildings my concrete should go four inches up from the bottom of the splash board. I am puting 2 inch foamboard verticaly down along walls. I am having 5 to inches of concrete poured. My question is do I need to put another 2x6 below the current splash board to back up the...

Ever hear of puting door sill in the concrete? Morton says they design it that way

Anybody use a circular saw to cut foamboard. If so what blade. Fine tooth plywood?

I read somewhere and now can't find it. Search isn't working on my phone for some reason tonight. How far down from top of floor do I need to put the foam board? Its 2 inch foamboard. 5 inch heated floor. I thought I read it should be 2 feet. Thanks

Is r19 good enough for walls on a pole building. It is 6 1/4 inch thick. Can't go thicker without compressing the material. Fiberglass rolls. Radiant heat also

OK after reading I have a few direct questions. On a five inch poor after building is up tp temp does it matter if the tubing is on the bottom or middle. Looking at efficiency and such. Should I use 1/2 oxygen barrier? For a fabrication garage and such do I need the 25 or 15 psi foam board...

Can water and electrical cable be run in the same trench as well as cable for TV?

Was going with pro rib on the walls. Wonder how finished drywall would look instead.

17,000 for 3024 SF concrete. Wow. That is five inch with foam board under and along sides

After alot of reading I'm still confused. I am getting ready for a floor in my 42x72x16. Other than some loft area it will be mostly open. What is the most cost effective after install price. . Forced air or in floor water heat the garage will be used four or morenightsa week until I go full...

How do I keep birds out of my new building? They are invading my new building while I am waiting for concrete and doors

What foes everyone pay for building permits. My county charges. .20 per s/f. Cost me 604a dollars just .for a permit to build a cold storage

What is a good size overhead door for one entrance. 42x72. Door centered on 42 end. Biggest thing would be an enclosed trailer

Any way to quiet down air compressor. Building new shop and thinking about putting it in its own room with vents and fans. Hard to talk when it is running. Upright Quincy. Don't remember model

Early with pics. Making sure I can do it right. Here is the site where my new 42x72x16 morton building will be

Order my new shop today. 42x72x16 Morton pole building