Search results

I live in Ontario and it gets fairly cold in the winter. We are currently on propane and propane water heaters are quite pricey. They have a $1200 rebate for the installation of a hybrid water heater making it significantly cheaper than replacing with propane. The sales guy wasn’t too excited...

I used Walrus oil

I like the look better with the risers. Nice job!

Great job! I would add a toe kick for three reasons, safety, looks more finished and it will keep **** from blowing in there.

I believe there is a safety switch that cuts off the motor on the blade housing? You most likely checked that but just in case I thought I would throw it out there.

We cut up some facia for the shed. Great to mill up what you need instead of buying it!

Watching this with great interest. We need to build a kiln!

I wish I had a kiln Milled some nice walnut today

well, I’m confused now. I thought I could leave the compressor direct wired and install a receptacle to accept the plug on the bs?

The compressor has a protect. Not sure about the saw (I don’t have it yet)

My thought is to hard wire the compressor and have a receptacle for the saw

Hi i am considering purchasing a Laguna 14BX bandsaw (any thoughts on the saw would be welcome). It is available as a 110 or 220. The 220 is more robust and it is actually a bit less money right now. I would need to run a new circuit for the 110 because I believe it needs a 20 amp breaker so I...

Great idea. Never enough stickers

I installed a 12k senville in the 700 sq ft loft above my garage A couple of years ago. It has worked great, exceeded my expectations. I did the install myself and hired a guy to pump it down and test with nitrogen ($150). I like it so much I’m considering one for the house...

We cut up some nice ash today. About 15 nice live edge slabs.

Nope, pressure washed it first and it was smooth sailing. Screwed it down to keep it in place

We had a cherry stump sitting around and decided to cut some cookies out of it. The stump has been out of the ground for 3 or 4 years and it was still plenty wet inside. Looks like some interesting projects for next year

I had this in my tool box for years. It was rusty and greasy. I dumped it into my electrolysis bath, scrubbed it up and I’m not sure how to get the clip back in. I see the whole where the spring sits but cant get it back together

In Canada

This will be the main use for me. We have a bandsaw mill and plenty of live edge lumber. I’m getting tired of trying to cut straight edges on the table saw