Search results

If you measure the thickness of the lamp inches, it will tell you what size it is. Every 1/8" = 1 so a 1-1/2" thic lamp is a T-12, a 1" = T-8, a 5/8" = T-5.

Just voted for him, good luck!!

Can you post pic's of the inside & outside of the garage door when it's closed? Thanks

How about $3,720.00

Looks Great! What do you think the total cost will be?

Why didn't the engineer tell you to use Flexicore & then the 1-1/2" of concrete?

I'll looking at a real estate ad for a home in Ft Myers Fl. It states the following: "10-12 slab with 16 steel tiebeams" Can anyone tell me what this means? Thanks , Matt

I have a trap door in my garage that goes into the attic. The door is approx. 3' x 6' (plywood), hinged on the 3' side. I have permenant stairs that go to the attic & my wife stores all kinds of stuff up there. The problem is that the door is tough for her to push up. I had a counter weight on...

I just installed some vinyl gutters on a one car garage, two 18' runs. I'm looking for a inexpensive product to keep the leaves & debrie out of them. Any GOOD ideas? Thanks, Matt

I have a small garage at a vacation home that I would like to have brick installed up to about 4' to match the house. The garage is wood frame (about 12' x 20') sitting on a concrete slab. I have heard of people installing a steel channel to the concrete & then laying the brick on this. What to...

Not some of the older cable! & you never know what your getting form a supplier or flea market. Alot of houses in the 60's were built w/ 12/2 & 14/2 & no ground & in the 70's some homes were built w/ aluminum wire so #10 is not good for 30 amps.

#10 copper is fine. Just make sure that the cable has a 3rd wire for the ground! For the motor, you do not need a neutral, but make sure you have a ground wire! Matt Murphy

If someone is really interested in a E-type, I may sell my 68 2+2.

Thanks for the replies & pics.!

I know this is of topic but I'll ask. I just bought a new 18' tilt trailer & it has a wood deck, 2x8's treated. I'd like to put a stain or sealer on the wood for looks & to help protect the lumber. Any good ideas? Thanks, Matt Murphy

One gives you pressure & the other releaves it!!

I saw on This Old House where they used some old truck mud flaps & isolated the opener from the ceiling!

The ring should also have some slots in it. You can anchor thru this ring, I don't think that your pex tubing would be run right up to the drain pipe. Also if you know which way your pex tubing is run (front to back or side to side), you could put the anchors on the opposite side of the way it's...

Don't think you are going to find a product that is going to work. You should be just bolting the toilet to the floor flange that is fastened to the drain hub.

That chair better not scratch the floor!!!