Search results

Actually, if you search for pneumatic (or diaphragm) brake bleeder, someone (probably in the far east) is making one that is available for $100-130 on Ebay and Amazon, including some adapters. It probably isn't Branick or KD quality, but perhaps it doesn't matter. It might be good enough to...

Actually, if you search for pneumatic (or diaphragm) brake bleeder, someone (probably in the far east) is making one that is available for $100-130 on Ebay and Amazon, including some adapters. It probably isn't Branick or KD quality, but perhaps it doesn't matter. It might be good enough to...

BAHON1 - Screw On BA08 - 2.11-2.17" BA09 - 2.7-2.91"

VERY happy to see you got more time! Things like that make you look at life differently.

I've seen a RacerX on a circle track forum or two over the years. That you?

Right. But to put things in perspective, the same could happen with a cutting disk or grinding wheel, and I don't think anyone feels unsafe with those around.

If you worry your toaster will set your house on fire if you leave with it plugged in, you probably should get rid of the torch. If not, you will be fine.

Cut this in two - https://www.amazon.com/dp/B0714K76XH/?tag=atomicindus08-20 Cap the cuts with these - https://www.amazon.com/dp/B07MWGPYQM/?tag=atomicindus08-20

I'm sixty five. About ten years ago I decided the best, and inevitable, solution was to start giving small projects to various nearby facilities as test runs. And start buying newer vehicles. I'm still content with that course, overall.

Fifty years ago I was part of a stock car team that did some spring re-arching. BFH and either I-beam or channel iron (to suite your radius). Also, a sucke...sorry, I mean "person", to hold the leaf. :lol:

He's stocking his retirement business - Randy's Red Rangers Relived :evil:

That or Rapunzel got drawn into the carburetor....

I have the first generation Sonicrafter, have used it extensively, and it has been great.

I just recently peeled contact-cement-glued formica off a particle board countertop and sheetrock walls. It wasn't that difficult. I imagine it would be even easier off of steel. If that doesn't sound reasonable you might try wood glue.

I do....

My opinion - I hope you are thinking of the vacuum as the last line of defense and not the first. The first line should be PPE - suit, mask, gloves, etc. The second line should be an air scrubber within a sheeted off area. Then the vacuum.

Was this enamel? You don't mention reducer (thinner). You can purchase it appropriate for the temp you have while spraying. Twelve inches of distance seems slightly far, as well.

Yard art?

Supposedly at one time the owners manual for a Rolls or Bentley, under How to Change a Tire, began with - "Instruct your man...."

Add some shadow foam and that would be perfect.