Search results

Introducing the Prototractor - the easiest way to build a roll cage and plan your bends. Use PVC pipe to create your tubing layout with little cost (or time), and then bend your tube with no waste! Even better, these measure rotation between bends accurately! These tools are patent pending and...

Hey everyone. We just made a video that should help a lot of you guys and gals out int he garage. We used the tubing bender we make (regular rotary draw type) to bump bend, which comes out looking just like a rolled bend. This saves a ton of money (no expensive roller needed), space (no storing...

Hopefully you guys like some thrifty race car fabrication. This car wasn't numbers matching and would have cost a small fortune to properly restore. Being a non Tii (more rare and valuable than our base model)... we decided to go resto-mod! We're going to put a 400+ HP inline 6 into a little...

Hey everyone, I thought it would be fun to share some tube bending projects. Feel free to reply with your projects! I love seeing what other people bend into reality! I have been busy in the shop, but finally found time to shoot a couple of videos recently. Here is the most recent video...

Some of you guys and gals already knew we had been developing something big. This is our newest development, a Mandrel Attachment for the M600 line of tubing benders. Unlike other inexpesive mandrel benders, this system uses industrial grade nickel-bronze alloy mandrels. It also features...

We've been planning this build for a while. It was originally considered to be built with pole barn construction, but as we added requirements (loft, sheet rock, insulation, etc), it became more sensible to stick build it. Specs: 42 x 60 x 16 Deck with roof (12x20) Loft with stairs (12x20) Big...

CODE: "imdonewishing" We put up a coupon code for the first time ever that isn't limited to just cyber Monday (sale day in Nov. if you didn't know)! IT is valid through the end of June and good for $50 off any purchase that includes one of our tubing benders and one of our tubing notchers. We...

We contribute content to the community here on GJ a lot, and we seldom make any commercial type of posts, but we have one sale for one day every year, and we though it would be prudent to share it with you guys and gals. Its our Cyber Monday sale! ***Cyber Monday is 11-27-2017*** We're...

Hey guys! We just started really stress testing our latest tubing bender, the Model 600xHD. We wanted to start a fun thread to engage with the crowd here and get some feedback and show off what our tools can do. We have really enjoyed having the GJ guys/gals as a resource and audience over the...

^CLICK on this picture, it is a link to our web page. The Rogue Fab model 600 Tube Bender kit WITH A DIE is only $650! (3.5/4.5 CLR only, 6.0 radius is an upgrade) This bender includes the frame, it includes a built in accurate DEGREE INDICATOR, and it includes (1) 180 degree die! 180 degree...

^CLICK on this picture, it is a link to our web page. The Rogue Fab model 600 Tube Bender kit WITH A DIE is only $650! (3.5/4.5 CLR only, 6.0 radius is an upgrade) This bender includes the frame, it includes a built in accurate DEGREE INDICATOR, and it includes (1) 180 degree die! 180 degree...

Big 'ole sale this year for cyber Monday! Here is the supporting text from our Cyber Monday Sale. The codes are live and the shipping is already 50% off! Get your order in, we will ship them in the order they are placed! elitecm: This covers our elite package, but only the...

Hey guys. I have a 10EE I am using here and there for shop projects, and the cross slide ways/dovetail are worn uneven. I took them apart and cleaned them and adjusted the gibs, and it is just like you'd expect, loose in the middle and tight at both ends. The main ways are in good enough shape...

We have needed one for a while. We made it simple, although it will get a lower shelf at aome point soon. I'm also going to add some more hooks under it for some storage. The top is .250 A36. It is tacked around the perimeter for easy replacement. A whole sheet is only like $175 or so...

Just got off the phone with them (Bonaire). I had to go tell people about it. about 4 years ago I searched for a reasonable output 12v compressor under $150. Settled on the Bon Air DD12. It had the highest output I could find (over a CFM, will air up a 185/14 car tire in 90 seconds from 0-30...

I finally found a Monarch 10EE, the lathe I have always wanted. The price was right, although I wanted one with the original DC drive. This one came mostly complete, less the entire DC drive. It came with some tooling (3 jaw, aloris style TP, cutters, holders, parting tool, etc). No steady rest...

Bought a house w/shop. Workbench had this guy mounted to it. Looks like a badass vice, less the bolt for a handle. Only marking I can see is a big number "6". Any ideas who made it? Any good? Either way, it stays and I'm happy to have it. :beer:

This might be my first thread on here... Making pallet forks for a front end loader. I know you all will hate this... They are going to be fixed width! I want them rigid, and the pallets I handle have a small range of widths. These are going to be simple, and rated for a ton (total) with a...

sig test pic, html bb

Hey guys amd gals, We bought a Kurt D60-1 for the shop in well used condition and cleaned it up. It was missing the jaws and handle when we got it, and it was a mess. We disassembled it, cleaned it up with compressed air and a brush, removed a few buwws, then sanded and painted it. We...