Search results

I bought a 50' garden hose from Walmart last summer. Now it's getting "*****". I get about 4 or 5 kinks on that hose. I use the hose mostly for washing my cars. Which garden hose is best and doesn't do any kinks? Also which nozzle is best for a car wash? Thanks

The power went off for several hours and I decided to use my Honda EU2000i generator to light up my house - first time to use it. The power restored and I shut it off. I don't think I'll use it again for a long time, should I drain gas from my generator (to prevent from "gummed up" inside of...

I have many tools in my garage, like screw drivers, sockets, wrenches, allen wrenches, star-sockets, hammers, mallets, measuring tapes, etc etc. My 20 year old son borrows my tool to do his simple thing, such as drive a small nail in the wall to hang his picture in his bedroom, etc. He did...

Selling Ingersoll-Rand DryStar Model DS50 (dry and cool air). Condition: unknown, never tested. I opened the box and looked inside. Everything are in there. Refrigerant compressor and all of other stuff like hoses and condenser are present. Not sure if the refrigerant R-134a is present inside...

I have a pair of fluorescent shop lights (T8) in my garage. I replaced the tubes (Philip ALTO light bulb tubes) about two years ago. Now they're burned out?? I think it has something to do with extreme heat, approximately 100-120 degrees in summer (and approximately 40 degrees in the winter...

See the picture. I don't know what is it for? I was thinking, maybe it's for fishing. See attached photograph. Thanks!

I am in the market for a new garage door opener. My 17 year old Craftsman garage door (belt drive) is getting old and needs to be replaced. I've never had a "smart" garage door (no experience with it). I would like to have it. Do you have any positive and negative experiences with it? Did...

I am going to paint kitchen cabinet doors with paint gun (3M spray gun, model 16580). It requires approximately 10 CFM. The maximum pressure is 20 PSI. I have a Husky 30 gallon air compressor 1.6 horsepower, 155 max. pressure. The SCFM (not sure what "S" means) is 6.2 at 40 PSI and 5.3 at 90...

Did the work in my garage by myself. See the pictures. First picture - before Second and third picture - after I installed shelf above my workbench Fourth -> seventh pictures - added new workbench, new tool chest, free old roundtable, new parts storage.

I have narrowed down to two air compressors: Husky 30 gal 155 psi ultra-quiet portable air compressor $399.00 @ Home Depot ASME certified tank 6.2 CFM @ 40 psi 5.3 CFM @ 90 psi 15 amps Can run on either 110v or 220v 1.6 horsepower Central Pneumatic 29 gal 150 psi $359.99 at Harbor Freight ASME...

I am trying to decide which air compressors I'll need for my garage. 1) Husky 30 gallon, 155 PSI air compressor 6.2 SCFM @ 40 PSI 5.3 SCFM @ 90 PSI OR 2) Husky 60 gallon, 155 PSI air compressor 13.4 SCFM @ 40 PSI 11.5 SCFM @ 90 PSI I understand that high SCFM, the better. Let me tell you...

I am going to put my 220v air compressor in the back of my garage (outside). I'd like to turn it on (and off when not in use) inside of my garage. I don't want walk from my garage to the back to turn my air compressor on (or off). I am thinking about install a wall switch (with label saying...

I am looking for a reliable, good light duty power washer (electric). Which one do you recommend? I need it for washing the house exterior walls, driveway, remove thick, dried mud from wheel wells, etc. I think 2,000 psi is what I need. What do you think of Sun Joe brand pressure washer...

Summer is coming. I am looking for a big diameter industrial-type ceiling fan for my garage. Somewhat similar to BigAss ceiling fan, but a bit smaller and affordable (BigAss ceiling fans are priced around $3000+ each. Yikes). If you have one in your garage, please post your picture here...

I am going to get a new stationary, vertical air compressor. Is it necessary for me to bolt down air compressor to the floor? What about rubber feet?

Check that out. https://club.craftsman.com/blog/7-examples-of-using-craftsman-storage-outside-the-workshop?sid=olv:753316:20409397:42332955&utm_source=Facebook&utm_medium=Social&utm_content=brand

I went to Home Depot and Lowe's, they don't even have 16 ft in length garage door stop moulding (PVC Composite), they only have them in 9 ft. Where can I find 16 ft? I'm in Riverside, California.

The title says... Where do you keep your Bendpak MD-6XP when not in use (storage)?

Last week a group of four teenagers vandalized my house with paintball, black spray paint and Sharpie pen. The teenagers were arrested a few days ago. I hired a power washer guy to remove all of the mess, including the black paint on my driveway. He was able to remove them, but the power wash...

Hello! I'm new to the forum. I've been lurking for the past week and decided to join. Love this discussion forum about garage stuff. I have a two-car garage and I would like to prepare/apply epoxy floor coatings (DIY). I went to Home Depot and Lowe's and examined both products. I'm not...