Search results

I cant seam to find a place that sells spiral duct registers. I need a source that will sell me one of each size for 18" 16" 14" and 12" spiral ducts. Does anyone know of a source with an online catalog.

Hello All I'm installing a heat pump in my garage. It has a 10KW electric coil. The system is fully installed except for the condensing unit and some ducting which are held up for parts. So I decided to try the electric heaters for the moment using Emergency mode. They seam to work somewhat but...

My heat pump requires a 30 amp HACR rated circuit breaker. I have a Siemens circuit breaker box Model P1212L1125CU. I cannot find Siemens circuit breakers for this that say HACR. I do have a GE model THQL2130 that says HACR that fits right in but the panel says use of other circuit breakers...

I just ruined a line set trying to bend a 1 1/8" tube with a ratchet style bender Mastercool 70080 see pic. I'm considering my options of avoiding bends and sweating or brazing in fittings. I'm also considering purchasing a new tubing bender...

Hello I'm installing a Goodman 3.5 ton heat pump. I have a question about the suction line. Because my air handler is more than 25' away Goodman is recommending going from 7/8" to 1 1/8" on the suction line. The unit looks to be setup with a female swagged fitting for 7/8" but I noticed the 1...

Hello I am installing a heat pump in my garage and I could use some suggestions on protecting the refrigerant lines. I have a steel building with steel interior walls. Removing the steel interior wall panels to get behind them is not a reasonable option at this point. The lines have to come...

Two years I completed my airline install with a complete loop around my 30x48 garage. I used 1/2" extra large QD's at my 2 50' 3/8" hose reals and at the air drop to my lift to keep pressure drop to a minimum. From that point all QD's are 1/4" Provost safety type. At the lift I installed an old...

Some reasonable welds and some real bad welds but at least I got it to stick together. I believe most of my problems are due to cleaning. But after sandblasting Acetone wipe and scotch bright Roloc wheels WTF. Biggest problem was the outside corner welds. The puddle just would not flow. I...

Anyone know of any 1" drop in anchors suitable for installing a 4 post lift. So far I have only seen 3/4" but my Bend Pak lift came with 1" stud type anchors. I would like to bolt down my lift with anchors I can remove and leave the floor flat. I guess I could use 3/4" with washers but would...

Needed to get my band saw and welders up on wheels. Heres a link to how it was done. http://www.garagejournal.com/forum/showpost.php?p=5856751&postcount=78

In order to make room for all my welders I find the need to put all of them under my welding table. An then I though of a brilliant idea (or maybe not so brilliant) of connecting all the grounds cables of my three machines to the steel table which include a transformer TIG welder, inverter MIG...

I just installed a new sub panel. Today I received a new circuit breaker 110 AMP GE to put at the main box, THQL21110 GE 2P 110A 240VAC GE THQL Circuit Breaker. The breaker I received springs back to the tripped position at all times. It will not stay in the On position at all. I'm talking about...

OK I'm getting ready to select a heating and AC system for the garage. Her in NC the most popular units are heat pumps. But I'm wondering if the beast unit for intermittent use in a garage might be something different and I would think larger. Using most of the online HVAC sizing tool, I'm...

When I sold my house in CT. The home inspector made me put a green bonding screw in the sub panel in my garage. Which I thought was wrong. When I came here to NC an electrician told me the bonding screw was being debated at that time ~ 3 years ago for NC. Weather you put it in or leave it out...

Have 58 ft of THHN-THWN-2 AGW 1 Red or black wire. Also have 58 ft of THHN-THWN-2 AGW 2 White. Brand new could not use it for my project. Excellent for a 125 amp sub panel. Would like to get $120 + shipping for all three will break up if required.

I'm considering upgrading my TIG welder from a Lincoln SQ wave 175 to the new TIG 200. The specifications look much better, but one thing they don't mention on Lincoln sight is weather or not the TIG 200 is high frequency start or scratch start. I believe since they don't mention it that it is...

Since I will be adding a new plasma cutter and a new MIG welder to my existing TIG welder I have decided to replace my welder outlet with a sub-panel and add multiple outlets. I currently have a 1.25" EMT conduit with a about a 55' run to my welder. Since I already have the 1.25" conduit I would...

I have been considering the purchase of a dual flow regulator for my TIG welder. Problem is I would like to have the regulator come off the welder instead of the bottle. So that when my welder turns off the flow, both the torch and purge gas turn off. Otherwise I know I will eventually come back...

I'm getting set to purchase a hyper therm unit. I'm undecided between the 65 and 45. I have no need to cut 3/4" steel but I do plan on building a plasma table and the 65 seems to have more stuff which appears to be useful for plasma tables. So the features the 45 does not have are auto voltage...

Quantity of 6 stack-able and nest-able tote bins. I have a total of 30 available, please please let me know how many groups of 6 as you would like. 6 Acro Mills and 24 Quantum Stack and Nest Totes are available. The Acro Mills and Quantum are compatible with each other for stacking and nesting...