Search results

I have a Generac DP6500 portable generator that I need a replacement tank for. I've already checked ebay, but the center to center hole measurements don't line up with what I've got. The ebay prices are excellent in the $30-$35 range, and I'll be damned if I'm going to pay $250 for a direct...

I have a 10 inch miter saw that will handle some Kwik Frame extruded aluminum pieces. What type of blade will give me a fine cut? Extruded aluminum, being pricey as it is, I want to get it right the first time.

I'm wanting to replace my heavy, warped, wooden sliding barn style doors on my shed with the extruded aluminum and girt framing and then cover the framing with metal panels. I purchased extra panels to do the sliding doors when I firred out the t1-11 siding on the shed and put the metal siding...

Guys, I've youtubed this many times, and after seeing others using screwdrivers and beating and banging on the crankshaft, trying to remove a flywheel, I said there's got to be a better way! I cut these 2 short pieces of scrap perforated angle to slide behind the flywheel. I then took my gear...

I need to replace the spare tire mounting hardware on my utility trailer, as it has gotten corroded. I would like to replace it with stainless hardware consisting of : 1/2"-20 x 1-3/4" all stainless carriage bolt retaining ring 1/2"-20 stainless tapered lug nut I've seen this hardware kit...

My neighbor got be to replace a dusk to dawn led fixture for her. She said it just "stopped working". Anyway, I brought the old one home, thinking maybe, if I take the photoeye out of the picture, it might light up, which it did, but not all of the leds lit up, and the rest were dim. The fixture...

I've got this M12/M18 combo Milwaukee charger that works fine on all of my M12 & M18 batteries except for one M18 XC 5.0. The charge indicator light toggles between green/red soon after plugging the battery in. The light on the battery only shows 3 bars, which, to me, would indicate a cell...

I have a rather unique situation. I have a steel framed house with 8 inch c-channel metal floor joists. In the beginning, to support the insulation batts under the floor, I installed the standard metal 16 inch wire push rods, but, of course, they won't dig into metal as they would in wood...

I have an older 7500w Generac generator with an electric start, model 1019-3, that I've needed to replace the battery in a couple of times. The problem, in order to remove the battery, is having to remove the gas tank to gain access to the hold-down bolts to lower the battery tray to slide the...

This is probably a long shot, but here goes: This is a Strongway hose reel that I bought from Northern years ago. I need to replace the four o-rings on the shaft. Has anyone replaced these? I bought a Vinton assortment from Harbor Freight, but it didn't include the size I needed. After putting...

I have a 20 foot shipping container that I use for storage. I've removed the decals and repainted the front and sides. I'm wanting to a material to fill the dents (not leaking) close to the corners (see pics) on the roof so rain won't puddle. Can anyone recommend a filler? I don't want to drill...

Have you thought about having a separate shipping container forum? I have many tips to share for anyone - how to buy, outfitting one, ventilation, etc.

I have an old Craftsman torque wrench that I'm trying to recalibrate. I'm trying to find an 11/16 (or 17mm) spark plug socket (the kind with a hex head on the end). The problem is that it can only have an outside socket diameter of 7/8", so it would be a very thin wall. The reason for this is...