Search results

LS1 - did you / will you pull a permit? Reason I ask - after pulling my permit for my 38x60 shop, about a week later I got a postcard from a local truss supplier offering 10% off my first order. I compared quotes of 3 or 4 different suppliers and went back to them as they were cheapest - then...

college student rental - dozens of appliances plugged into each bedroom with limited outlets, stereos, phone charges, video games and large flat screen tvs, hairdryers... yes - upgrade to 200 amps!

After some grueling research - I found that Dessie was Maxim magazines 2013 Hometown's Hottie Champion http://www.maxim.com/girls-of-maxim/dessie-mitcheson-profile

I looked in my recycle bin and found the picture that I had deleted from my desktop. It was dated 2/14 - so that is the evening I posted the picture with my comments.

I remembered today that several months ago I had posted some comments on a thread about a member here purchasing a Gerstner tool box off ebay where he had issues with the condition. The ebay add showed pictures and a description that the chest needed some refinishing but otherwise was in very...

That is not an issue.

Having it before the tank prevents the moisture (water) from entering the tank to begin with. This would hopefully decrease likelihood of rust to the tank.

This guy can move anything!

Good job!

That is Jessica Alba.

I've got a portable radio in the shop on FM And don't have any issue.

For my 38' x 60' shop, I bought 20 of these: http://www.homedepot.com/p/Lithonia-Lighting-Tandem-4-Light-Flush-Mount-Ceiling-Electronic-Fluorescent-White-Strip-Light-TC-2-32-120-1-4-GESB/100192753

I completed siding my shop a few months ago and thought I'd post some suggestions and tips from my installation. I hope the below is clear to understand. I built a work table in order to measure and cut the siding to length. I used some 2x4 10' studs and some other framing scraps to frame the...

I purchased a few inexpensive single qty items for my garage wiring from my local electric supply house - 1 trip I paid <$5 total for several items. They didn't seem to mind. I made many other trips to HD and Lowes for everything else.

I'd suggest that is NOT a good solution - nor is trying to file the hole with glue. The grain on the dowel will be long grain in the same axis as the lag bolt. What is needed for strength is cross grain wood. The best solution would be to increase the diameter of the screw which would...

Enco - $34.95 http://www.use-enco.com/CGI/INSRIT?PMAKA=505-6544&PMPXNO=950106&PARTPG=INLMK32

Don't skimp on the nutdrivers!

Got mine today as well. Didn't bother to open it up to look at the battery- it works fine!

I just bought the last one - based on the refreshed page. Thanks!

Not true. They actually have a help page dedicated to the subject: http://pages.ebay.com/help/policies/manufacturers-coupons.html