Search results

I missed the bottom step going down the stairs in the dark a couple of weeks ago and crashed and burned twisting my ankle a little. Back when I was drinking I used to tell people I'd better practice falling down a few times before I got too drunk lol. Anyway, does anyone have a suggestion...

My son has a steel roof he needs to install a bath exhaust vent on. Any ideas?

Got a new Interstate battery for my mower last year and now it's dead. My 3 year old grandson messed with the switch last fall and left it on but although weak it started to turn over so I had to jump it. We used it after that and it was fine but now it goes dead in less than a month ( twice...

I'm going to re hang some 6 panel doors and they be heavy so these would be handy. I don't need the best but I can see where they would be nice to have around if needed for the odd situation that might arise. Recommendations appreciated

Need to remove a 1/4" off the end of a granite Bath vanity top and backsplash some butchers buried in sheet rock. I removed the vanity and separated the backsplash and will cut or grind them in the garage if I end up doing it myself. Looking for advice from someone who has successfully done this...

Just what it says ☝️

I need to have a look under a bathtub I regretfully had some "come to find out" qwik buck artists install. After what I paid them what's a few more bucks?

As the title says. With a Tray would be nice but not a deal breaker. Thanks

https://zep.com/products/heavy-duty-floor-stripper-zulffs128?variant=41135685238942 Jason at Fireball Tools says this works great as a degreaser. Anyone tried it?

https://www.harborfreight.com/media/catalog/product/cache/9fc4a8332f9638515cd199dd0f9238da/5/8/58024_W3.jpg Are these spring loaded like a hose reel?

My BIL has I believe a Schumaker he got at Costco a few years ago and it's bailed me out a couple of times when I've had a weak battery on something or another on the farm. He uses it instead of putting a new battery in his riding mower because batteries just don't last in his mower for whatever...

Looking for a thread where a guy shows how to overlay a sheet metal patch panel, making small cuts and tack welding in around the patch panel repeating the process as he works his way around the patch. Seen it a while back but now I can't find it. Anyone got a link? Thanks

Nothing is set in stone yet but my plan is for concrete floor through out and to finish and insulate at least 3/4ths of it with white barn steel on the ceiling and most of the upper 8' of the walls, with the bottom 8' plywood or osb so I can customise my work and storage areas with built ins as...

Amazon has the Milwaukee 2723-20 Compact Router for $141.13 compared to $199 at Home Depot. I've never bought any Milwaukee tools off Amazon for fear of getting a returned or a refurbished tool. Surely there's a reason why it's $58 cheaper. Opinions?

I'm wanting to install automatic closet lighting in my house (existing construction) with the preferred method being which ever method would be the easiest. This is a 3 level split with all 5 closets on the same level within roughly a 16 to 20 ft radius as far as accessing the framing foot...

I've been sitting on the sidelines waiting for building materials to come down to earth but copper is still so high I'm wondering if low voltage lighting is catching on or is it all just cost realitive to getting what you pay for performance wise?

I need to pilot counter bore some existing 3/8" holes out to 3/4" OD in some MDF to get the nuts below the surface. Some sort of flat counterbore that fit on a 3/8" drill bit would be ideal. Any suggestions on where I could find one reasonable? Thanks

Was planning to use about 30' of Proflex CSST in a crawl space to supply a gas fireplace but have heard of Lightning causing arcing problems with it. Now I'm leary of the stuff leaking and blowing the joint up. Bonding is supposed to help with arcing but lightning is so powerful that there are...

I need to do some re-sizing on the LP lines in my house to accomodate more BTU demand. My current 2nd stage LP regulator is for 3/4" pipe. I need to up-grade to 1 1/4" pipe on the down stream side of the regulator for first 8 feet to meet the new BTU requirement. According to the LP service...

The wind blew over a pick up box I had standing on end and put a fist sized dent in the bed rail. It's going to take a stud welder to fix it because there's no way to get a dolly or spoon behind the dent short of drilling out all the spotwelds. The Harbor freight stud welder doesnt sound like...