Search results

Looking for some advice on how to dial in this setup: SEE UPDATE on post #5 Machine- Grizzly G0614 1.5hp swivel head metal band saw VFD- Mysweety 2.2KWH unit 2.2KW 220V VFD: Input voltage: 220V(+/-15%); Output voltage: 220VAC; Input frequency: 50/60 Hz; Output frequency: 0-600 Hz; Input...

I've got a line on this Logan 920 turret lathe Seller says everything works as it should Minor repairs to the gear set (couple new gears and a braze job to a fork) Gear set rotated freely w no noticable backlash Visual inspection says it looks clean Wasn't plugged in to test Includes: 3...

Hoping to get some help finding a _ compact _ automatic _ only need 2 amps _ 6ft-12ft cord length (longer is fine) looking to mount one of these into a cabinet for 2 uses a week so it doesn't need to super robust. I've looked in the usual places, no luck for something that checks all the...

Looking for some help identifying this Quincy compressor Perhaps a 70/80s vintage, 60 gallon tank, with part # 112586R ? on the head Any info is appreciated Thanks compressor gurus s

Looking for a quality set of drivers. Amazon is a swamp of off brand sets. Not sure where to look for these? Need 1/4 hex drive (impact gun) Allen bit set in both SEA and Metric Willing to spend a little coin for something that will last, Wiha, Wera, Bondhus, etc.... Something like these

For Sale_ Knu-Vise P1200 adjustable locking pliers These are very cool still in production locking pliers, typically used in a production setting, excels at repetitive processes Offer lots of flexibility with different jaw attachments Super robust construction, these sell for $40+ new...

I'm building a custom welding table and would like to utilize the space underneath for my hand tool storage Box height is limited due to a 8" thick (tab n slot) table top Thinking anything up to 22" high is viable _ no pop top versions as I wouldn't be able to use that space _ width from 40ish...

(UPDATE) - if anyone has a link or some to sell lmk, they are out of stock Over the years ive collected about 20+ of these stellar Home Depot Husky 10 bin small parts organizers for a modular system. Ive even gone as far to recommend them here on GJ many times, they have been a excellent...

I want to make a power strip for my 50amp service. Just like a common 120v but 240v and 50amps. Thinking of 4"SQ boxes, tied together, with 8g wire. Two 6-50R and two L5-30R. Run a short whip w a 6-50R to my 50amp plug. Anybody done this or similar?

Scored a deal on 2 table saws that a cabinet maker didn't want to separate. 1st candidate: 1990 Delta RT31 - 10" right tilt blade - scoring blade feature - 15.5 amp / 3hp 1ph motor (USA) - made in Brazil 2nd candidate 2006 Delta Unisaw - 10" left tilt blade - no scoring blade - 12.5 amp / 3hp...

Friend has a compressor for sale. They dont have any info on other then it was working when pulled. Industrial Air Model # C521EBON 80 gallon 175psi 7.5hp 1ph Dual stage? Mfg date- ? Valve style- ? After some research I think this is a Sanborn pump, and perhaps a Saylor Bell knock-off or...

Looking for any information or insight on this particular unit It's a Roger BG 5H rotary screw compressor circa 1994 230v 3ph 5hp 150psi @15cfm Sounds like a nice compact package, but I'm not finding much info out there Anyone have experience w this unit or anything Rogers? Also what else...

Can anyone provide a link or better verbage for the (clear) vinyl protective stripe that comes on new saw blades? Not the wax, but the roll of plastic/vinyl? What I'm really looking for is a CLEAR super low profile sheet metal edge protector. My project has lots of cut 18g sheet metal edges...

Looking for advice on how to remove spray paint from a galvanized steel sheet without disturbing the finish Any experience doing this? Trying to keep the base material as close to it's current look as possible, not cleaner, just no spray paint

Pretty cool product coming out of Kickstarter https://www.kickstarter.com/projects/koenmeukens/blstrsander/description Ever wanted to sandblast something and didnt have the compressor and booth? Handheld, 120v, multi media blaster that is portable. Seems like it could be a excellent...

VFD hive mind unite Im looking at a used Ellis 9400 DP w/ what being called "busted circuit board" This is a excellent DP otherwise in pretty good shape. The question: _ besides doing a direct factory replacement of the VFD through Ellis ( I have inquired and awaiting a response from them)...

Just scored this flaring kit for less than 3 digits. Can't find much about this particular model? Look, feel, and some research point to it being a good if not great tool. Anyone out there have experience with this set? Got some projects lined up this year to take advantage

Picking up a few auction items tomorrow, pretty excited about a couple but one in particular I don't have much knowledge about A Lab-line Vacuum Oven What are the for? What kind of numbers do they produce ( both vacuum and temps)? It's a older model, don't have good pics yet. Looks to run...

Looking at a 5hp 220v Napa "Iron Man" series compressor from what I believe is the late 80s or 90s Can anyone id the pump? OEM? THANKS!

Laying some new flooring and need to purchase a Medium or 16g stapler for the underlayment. Question- I see 16g staples AND 15.5g staples are they interchangeable? Looking to scoop up a gun and staples tomorrow AM, please chim if you got experience running these.