Search results

Intersting idea with the metal studs taped to the floor. Is it reasonably solid?

Will call you in the morning. I don't think there are any particles (sandy is not the right description), its more just a little bit cloudy.

OK...I opened up the Part A. Is this the sandy look that was being described? Is this where I need to put it in a pan of hot water and stir? It's all liquid (nothing is a block), but just wanted to verify. Will be going down this weeknd (assuming all is well)!!

Have a 40 x 50 shop with three different overhead doors. One is smaller, and I use it for my dirty tool storage (tractor, shovels, sprayer, etc.). The rest of the shop will be more for cleaner toys (car/plane work, etc.), proper man cave, etc. Shop was a nice epoxy floor. The shop is...

One last question...its been in my house since the winter and getting ready to reapply. As I looked at the paperwork, I realized I may be a month or so over the year shelf life (didn't realize it). How critical is that (should I be concerned)? Going to redo this floor for the 2dn time, and I...

Finally planning to pull the trigger this weekend, as temps have obviously warmed up for epoxy recoat. Would shot blasting be a better option? I think I heard that the grinder with 20-40 diamonds would be the best to try first, then PCBs if no luck with the 20-40 diamonds. I'm willing to...

I picked up a 4' wide self standing paint booth for a steal. It is missing a fan. I determined that it needs an 18" tubeaxial fan with 3/4 hp motor. Question is this...if you have the 20" filter wall installed and appropriate fan, will the filters catch the overspray such that you could...

Thanks all. Sounds like I should be able to tell. If I do have some crystallization, warming and stirring should be able to bring it back to where it is totally clear?

Thanks all. Im confused on the PCB part and 20-40 diamonds. I assume that is the "head" to the grinder that you rent separately? Sounds like something like this is the way to go. Im just not sure about the heads part...

Assuming I don't want to use a Diamabrush pad with a floor maintainer (I used that initially and not sure if that is/was as aggressive as needed), what would be the more heavy duty tool to use for old epoxy removal and surface prep? Looking at this...is it the Concrete Grinder Dual Disc...

The spec sheet says the epoxy wants to be stored in 60-90 deg, or it could crystallize. I had it in a semi-climate controlled shop for some time. Its since been moved in to the house, but I'm wondering whether I should be worried. I don't want to install it all then have an issue. Will I be...

Thanks guys. Similar, yes, but definitely not the same. Problem is, I have a large number of the others and I naturally want e erything to match.

I am in Kansas City area. I’ve seen some at outlets, but the closest is 12 hours away. Wondering if anyone has some to sell or trade.

Sears apparently quit selling their metal cabinets? I unfortunately have several but need more. Naturally they all need to match, but I apparently can't get them anymore? They have 32" floor standing and 28" wall boxes. I mainly need the 32". Anyone know where to get them and/or have some...

Not to distract the thread, but on the topic of painting kitchen cabinets, does anything need done to fill the grain of oak before painting? I have the old golden oak style, and would like to go to a white or grey painted look.

Thanks. I should have noted that I do heat the interior space so I worry about the "room". Sounds like the answer is no vapor barrier on the walls. Thanks.

I have a 40x50 metal shop and am located in Kansas City area. I had 2" of closed cell foam spray on the ceiling (they sealed everything up), and they sprayed the bottom 3' (up to the first girt). I did that to really seal the bottom edge with the ridges. I am doing the horizontal framing and...

I have a standard 24x24 utility sink. Rather than using the cheap looking legs that came with it, I'd like to build it in to some cabinets. Looking for ideas on what others have done? Also, any leads for more cost effective larger sinks? The 24x24 is cheap, but the 24X40 seems to triple or...

I bought the 3/4" air line kit and debating about how best to install it. My original plan was behind the drywall (so as to not see it), but now I'm second guessing. Anyone install it behind the wall have any issues? Do you have to run it so that there is a "drop" at each station you want an...

Installing my BRT 75 (forced air 75000 BTU unit) from Menards and had a few questions. 1) The instructions state that depending on which side of the fan you want the inlet/exhaust units to go (left or right), you may have to remove and replace the mounting brackets and "invert" the unit? I...